Thread: Anybody Privvy To Dealer Tech/Repair Info? Need Help!
View Single Post
  #2 (permalink)  
Old 05-23-2008, 09:40 AM
DenOfThievz's Avatar
DenOfThievz DenOfThievz is offline
Junior Member
Points: 1,859, Level: 17
Points: 1,859, Level: 17 Points: 1,859, Level: 17 Points: 1,859, Level: 17
Activity: 0%
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Jan 2006
Location: Sunny SouthEast
Posts: 14
Photos: (0)
Re: Anybody Privvy To Dealer Tech/Repair Info? Need Help!
Ok - I got it (I think/hope!). Here it is (if anyone really gives a ratz azz):
  1. Slam a beer or two (my contribution)
  2. Press (LOCK) button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.
  3. Turn ignition to run position. (Allow ignition chimes[UNLOCK] to stop).
  4. Using any original (working) transmitter, press the [UNLOCK] button for 4 to 10 seconds.
  5. Within the specified 4 to 10 seconds, continue pressing the [UNLOCK] button and press the [PANIC] button for 1 second and release both buttons. A chime will sound to indicate that the transmitter programming mode has been entered (allow 3 seconds for chime to sound).
  6. Press [LOCK] and [UNLOCK] buttons simultaneously for 1 second and release.
  7. Press and release any button on the same transmitter and a chime will sound after successfully programming the transmitter.
  8. Repeat steps 5 through 6 to program additional transmitters.
  9. Turn ignition to OFF position. Transmitter programming mode will discontinue after 60 seconds. (All transmitter programming must be completed within time specified).
__________________
Complaining about your SRT-10's gas mileage is like boning Paris Hilton while whining that she can't do your taxes...
Code:
2005 RAM Quad-Cab SRT-10 YELLOW FEVER #292
Eventual SRT-8 owner (Jeep or Challenger)
Last edited by DenOfThievz : 05-24-2008 at 04:51 AM.
Reply With Quote