03-06-2012, 04:46 PM
Is there a plug and play threaded AIT that with 3/8 NPT threads that will work with our ECM and screw into this: IAT Sensor Adapter Tube BEGi (http://www.bellengineering.net/product_info.php?cPath=6_41_297&products_id=674)
03-06-2012, 08:08 PM
There are only two IAT sensors (short and long) that are used on the Challengers. The sensor diameters are 1/2 inch and made of plastic.
Perhaps search online for an inverted 1/2 hose to 3/8 NPT that the plastic sensor could fit in.
Even so, I think drilling the correct size hole in the intake tube material and using a rubber grommet will be easier to work with and a more cost effective solution. The rubber will provide a better thermal barrier to conducted heat transfer to the sensor.
Sent from my Autoguide iPhone app
03-08-2012, 01:49 PM
there are guys on LX forums that have used threaded ones from AEM, and viper threaded IAT's. I have not heard of one of these used on a VVT motor though, only the older LX Hemis. I want the screw in style to prevent it from coming out or leaking under boost.
03-09-2012, 06:19 AM
Tony, How much boost do you plan on running?