Dodge Challenger Forum banner

Anyone install a barcam 221 recently?

2K views 1 reply 1 participant last post by  Maddys013 
#1 ·
Ordered one from coastaltech.

No instructions to speak of and the wiring in the box does not match the image on their site. The few vids I have seen are for a different version of the barcam 221 as well. Somebody else here must have got the same stuff and figured it out.

I have a 3' power lead - nothing to get back to the head unit - and I have different color wires for the scale lines and some other accessory.

Before I tear the mygig out and reinstall the Lockpick, I thought I would do the camera too.

Any suggestions would be appreciated. From all I have read about coastaltech, i may not get anywhere with their CS dept.
 
#2 ·
Bump

As expected, tried installing it. Doesn't work. Can't tell if it is the camera or Lockpick because the Lockpick instructions for wiring the back up camera are ambiguous at best. Tried a variety of combos of wiring and nothing out of the camera.

Anyone else try???

Does anyone have a barcam 221 installed and actually working?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top