Exterior Discussion / ModificationsWant to change the look and appearance of your Dodge Challenger? This section is for the discussion of any exterior visual modifications. Examples include wheels, custom paint, grills, etc.
Here is a crappy cell phone picture of our new challenger. The wheels are 2 piece Foose Challenger wheels. 20x9 in the front and 20x10 in the rear. They are supposed to look like the rally wheels that came on the old challengers. I am going to clean it up and get some better pics of it.
__________________
2008 Challenger SRT-8
2001 Saleen S281sc, 760rwhp and 753rwtq, with nitrous 853rwhp 836rwtq spinning tires on dyno.
__________________
2008 Challenger SRT8, Hemi Orange, Mygig, Sunroof, 22x9 and 22x11 KMC Nova's, 215mm 3.55 gears(big difference!), Mopar T-Handle Shifter, Challenger Sill plates, Mopar Pedal Kit, Challenger Fitted Trunk mat, Diablosport Programmer, MAC cold air kit for now, Jones Mufflers and no resonators, more to come... New Challenger Parts
__________________
2009 Deep Water Blue Pearl R/T Challenger Automatic.
Ordered 5/17/08.Status :In my driveway on 9/10/08
2005 SRT-6 Crossfire : SOLD, but not forgotten.
1976 Harley FXE, Shovels Rule !
I think Dodge may be coming out with OEM 70's style that are similar to those. They were on the 'white one' that "Kowalski & Super Soul" drove in the One Lap of America race a few months ago !!! Here :
I think Dodge may be coming out with OEM 70's style that are similar to those. They were on the 'white one' that "Kowalski & Super Soul" drove in the One Lap of America race a few months ago !!! Here :
Those wheels are the same wheels on my car. They are just painted grey and not brushed.
Yeah, I've been "stop-actioning" the OLOA video and can see 'FOOSE' on the center ;I didn't realize that -that Foose's wheels were a part of this Challenger.What is the two parts [all about] ? I would think Dodge if using Foose's or updating the OEMs would make a one-piece like originals whether forged or cast...which ever is better. I don't know the difference between forged and cast : is one stronger or better quality ?
Forged is stronger and usually lighter. Back in the day, Mopar motors were considered "over-engineered" because the bottom end on the big blocks and some internal parts of the small block motors were forged, rather than cast.
Forged wheels will be lighter, stonger, and of course, more expensive..
I like those Foose wheels, but too many $$$ for me. I'm looking at these KMCs, which have a similar look.
__________________
2009 Challenger R/T 6-speed (white)
Ordered 5/12 - built 9/12 - placed into service 9/17 by Chrysler LLC
2008 Shelby GT500 convertible (black with red stripes)
2006 Charger Daytona (TorRed)
1994 Caprice wagon woody (white) - lots of mods
I like those Foose wheels, but too many $$$ for me. I'm looking at these KMCs, which have a similar look.
Ahhh, I'm just not sure you like those : Do you ? Just remotely similar, they seem to look just a bit "blingish" [ to me of course] !! I always liked[ and had] the '70 Style Road wheels-Class 2 Chrome on my first Challenger, then tranferred those onto my second which had those OEM Class 1 Rallye Type /Foose-like ! There was also another similar to the Rallye which was named a Class 2 Chrome Plate Disc 16 slots !!!
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Linear Mode
