Dodge Challenger Forum banner

Blendmount and Valentine

1K views 1 reply 2 participants last post by  G2G-FAST 
#1 ·
For those with a '15 or "16 Challenger that plan on installing the Blendmount here are some important tips -

1) Remove "center link" of the Blendmount or else RD will hang 3" lower than the rear view mirror.
2) Be careful tightening the Blendmount screws. I, like another member that reported a similar incident, popped of the rear view mirror. Freak out! Lucky I was near a dealer. To reinstall your mirror remove the Blendmount and the two large plastic covers behind the mirror, next to the window. Angle the mirror at the 9 o'clock position and align the center with the metal bolt on the windshield. Press firmly (careful not to crack the windshield) and rotate the mirror to the 12 o'clock position. Replace black covers and Blendmount.

Blendmount looks 100% factory ... and Valentine saved me (going 98) a ticket today!
 

Attachments

See less See more
1
#2 ·
Which BlendMount model did you purchase?

Is it the BV1-2000R?

Thanks!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top