Dodge Challenger Forum banner

Window Sticker Question

2K views 19 replies 10 participants last post by  Slidd 
#1 ·
Just bought a new 2016 SXT PLUS and the dealer kept my window sticker.
I thought they put it in with my paperwork but when I looked a couple days later it wasn't in there.

I called DODGE customer service looking to get a copy and they said I had to get it from the dealer.
Dealer said they don't have it anymore and just printed me up a 8 1/2" X 11" small paper copy.

Anyone have a source where I can get a REAL regular size copy of the window sticker??
 
#2 ·
Might ask @DodgeCares . Your dealer should be the one to get a replacement, if they'd put in the effort. A Guy
 
#3 ·
Your dealer can order a new window sticker, they just have to be willing to do it. They have to make a phone call, send an email with your VIN, and be willing to take the time to offer good customer service after the sale. Or.. go to this link: www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin=YOURVINHERE , replace YOURVINHERE with your full VIN, all caps, no spaces, and you will get a .pdf of your sticker. You can take that to Staples or Kinko or wherever you want to have it printed in full size.

Then go to this link: www.dodge.com/webselfservice/BuildSheetServlet?vin=YOURVINHERE , again replace YOURVINHERE with your full VIN, and get a copy of the build sheet with all of your car's options and equipment.

Congratulations on your new car. Let's see a picture.
 
#13 ·
Then go to this link: www.dodge.com/webselfservice/BuildSheetServlet?vin=YOURVINHERE , again replace YOURVINHERE with your full VIN, and get a copy of the build sheet with all of your car's options and equipment.

Congratulations on your new car. Let's see a picture.
Any ideas why my VIN would not work on this link? Yes, I replaced "YOURVINHERE" with my VIN, and Yes, I've confirmed the VIN is correct, even copied & pasted the VIN from the dodge user site. and I've tried it on two different computers and two different browsers... found another Challenger GT's VIN and it worked... tells me: "No records found corresponding to the VIN provided" ... Is there a delay from the date of purchase? ~dave
 
#4 ·
Hi SoCalChallengerLover,

If you'd like to PM our page with your VIN I'd be happy to look into this further for you!

Andrea
Dodge Social Care Specialist
 
  • Like
Reactions: A Guy
#7 ·
Well, as far as the bracket go's they put that on when they put the car on the lot to sell, unless you ordered your car which few people seem to do out here anyway.
Here in California the front plate is required or it gives the Cops a reason to pull you over.
 
#10 ·
I believe it's at status KZ, so that means the car has been built and the dealer invoiced. Should be leaving Brampton or GE soon or may be gone already. Congratulations! [emoji106]

Sent from my SM-N920T using Tapatalk
 
  • Like
Reactions: 383Mag
#9 ·
I'm running no front plate all all cars since the mid 80's and only pulled over twice, no tickets either time. My dealer requires a written paper document expressing permission to apply the bracket at pickup.
They said most flip out if it's drilled without asking.
 
#15 ·
#19 · (Edited)
Slidd , I tried it with your link for window sticker and still get unavailable vin #
any ideas ?
here is my VIN # 2C3CDZBGXFH706255
someone want to try there luck for me please
P.S. there is one made as I have it safely put away

Here's some links...

http://www.dodge.com/webselfservice/BuildSheetServlet?vin=2C3CDXCTXHH556506

http://www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin=2C3CDXCTXHH556506

Just back out the parts of the VINs above that is wrong and put in your corrections and should work!

Sent from my SM-N920T using Tapatalk
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top