Photos - Large Detail Pictures Taken At Carlisle

[xs29j8]

Here is a link to some large size detail pictures of the Challenger Concept car taken at Carlisle and hosted on Moparts:

http://www.moparts.org/moparts/pictu...ger/index.html

XS

[Ragamuffin]

Thanks for the pics ! On the one that shows the rear undercarriage,though I've detected a smallish round rust spot on each of the exhaust pipes . Could this be from idling too much or long? I'm wondering if those can be carefully drilled out and some type of special drain ports installed to allow the acidic vapor/drops to evaporate quicker.Also a designed drain port which also would make the Challenger Concept sound even more cooler than already ! Another item are the dual mufflers ...unless there's an optical illusion, I seem to notice what look likes a real bad "crimp" job . I hope this does not sound too critical of this 'Beauty' ! Also, I cannot tell if the exhaust system is stainless or galvanized [ although I would expect stainless on a concept for longevity: or is there a finer way I'm not aware of ? ] ! Does anyone know ?

[l3it3r@gmail.com]

Those spots are probably where the exhaust rubs when they take the ridiculously low concept off of the trucks. The production car won't be nearly that low, so no worries. I've seen it up close and it's a beauty, but I doubt that the production car will look much like the COncept's unforgiving resemblence to the original.

[Challenger4-TheWin]

do the guages actually display 0-60 and quarter mile times??

[Dodgeram44]

Originally Posted by Challenger4-TheWin

do the guages actually display 0-60 and quarter mile times??

Not on the concept car, it's just a fake as of right now.

[Challenger4-TheWin]

Originally Posted by Dodgeram44

Not on the concept car, it's just a fake as of right now.

i hope they do though that would be soooooooooooooooooooooo sweet.

[Challenger_Nut]

Originally Posted by Ragamuffin

Another item are the dual mufflers ...unless there's an optical illusion, I seem to notice what look likes a read bad "crimp" job .

What you are seeing is not a crimp. It's a weld bead.

[Ragamuffin]

Originally Posted by Challenger_Nut

What you are seeing is not a crimp. It's a weld bead.

Oh,ok ! looks a little strange,but maybe that's normal [these days] as I'm not a Mechanic,welder or anything ,I mean ; oh maybe a little ....but anyways, it's looks like a series of 'dots' those are the welds then ! Is there anything like a Rapid Lazer Welder : maybe that's what did that ?