Will putting eibach springs void my suspension warranty?

[stevewhiteparts]

Originally Posted by Jasper_wash

What springs did you install on your car? How long did it go? I wanna get a 2" drop but im afraid my tires will rub since I have 265/45/20 all around

should be fine in the rear, most likely will have issues in the front

im lowered 1 3/4 and 1 5/8's with 275-40r20 all the way around, had to use 3mm spacers in the front

Luke

[streetrod782]

I went with the Eibach sport and I think it was about an inch all the way around. Went with bar end links as well. Took speed shop all day including alignment. Handles like its on rails. I also have Nitto NT05 all the way around. Front and rear sways as well as strut tower braces up front and in trunk


Sent from my iPhone using AutoGuide.com App

[pinned]

Have any of you guys experienced issues with the axle geometry as a result of lowering in higher horsepower applications? My cars axles are perfectly level and perpendicular to the center section at its stock height. Im worried about premature wear and or vibration/ breakage when I hit the 500 hp range. Thanks in advance

[jknoff72]

Luke, with the mopar stage 1 springs....are all dealership techs/mechanics trained on installation of these components or should i look to have it done by an outside party....secondly are there camber issues that have to be addressed or are they straight bolt in hassle free application...?


Sent from AutoGuide.com Free App