Those are the stock wheels that I had widened by Weldcraft to 10.25”.
When they widen the rims the do it all to the “inside” - so all of the extra 2.25” would be in towards the wheel well and would have most definitely not fit. I have 1” bolt-on spacers and now I have about 1/4” of clearance inside the back of the wheel wells. Apparently that’s enough because Ive taken some hard corners and bumps trying to get it to rub and it has never rubbed yet.
If you bought an aftermarket 10” wide rim with +25mm spacing you could run 295 tires and they would fit just like mine with no spacers required. I only needed the spacers because of the way they widened my stock rims.