Dodge Challenger Forum banner

Recent content by raceheart77

  1. Defending 5.7 owners!

    Dodge Challenger R/T Specific
    I have had only SRTs (6.1 and now 392). They have been my 3rd or 4th cars in my garage. If I only had to have one car, it would be a 2011-2014 R/T classic. One of the best looking Challengers ever made. The 5.7 is a great engine, nice interior and audio options.. and you get the best looking...
  2. Has anyone painted these wheels? Need advice.

    Exterior Discussion / Modifications
    no way in hell would I paint those black..but hey thats just me. Great looking design on those wheels.
  3. Inexpensive gas door MOD

    Exterior Discussion / Modifications
    you did a great job cutting those edges. I would have been all over the place...looks super!
  4. Rear tire width for 2014

    Wheels, Tires, Brakes, and Suspension
    you will be fine with the 315s with STP. If you were lowered another 1"+..you probably will get the rub over hard bumps.
  5. Does straight pipe kill the SRT 392?

    General Challenger Discussion
    I can hear a drone with straight pipe immediately and I know I am not half dolphin either. It can get quite annoying after long rides. Im going cut outs this time..shut that off when I need to and hear pure violence when I want to.
  6. 20x11 front wheels

    General Challenger Discussion
    i'm running 20x10s up front like some in here. a few hand full are running 20x10.5s.
  7. Torq Thrust II offset question

    Wheels, Tires, Brakes, and Suspension
    My stock rims are 20x8 with 25mm offset. If I understand currently, a 20x10 tim with 25mm offset would divide that extra 2” equally - basically giving me 1” extra on both the outside AND inside compared to my current rim. (Am I correct so far?) CORRECT! If I am correct, then my question is...
  8. Aftermarket rims

    Wheels, Tires, Brakes, and Suspension
    here is a flow forged wheel demon style that will be light. It looks like they come in many colors. dirt cheap at $999 for a set of flow forged rims. 9.5 and 10.5 setup...
  9. What did you do to your Challenger today??

    General Challenger Discussion
    Applied some black detail polish after the wash. First time I used this stuff. I like it.
  10. Torq Thrust II offset question

    Wheels, Tires, Brakes, and Suspension
    yes, those are made for our cars. The 295s will stick out a bit with the +15 but I like the look of a little poke in the back anyway.
  11. Torq Thrust II offset question

    Wheels, Tires, Brakes, and Suspension
    Yes, the VN405..not 407. Here are some pics on challengers...some from our members. I think these wheels look great with the step lip. If my brembos would allow, I would get these.
  12. Torq Thrust II offset question

    Wheels, Tires, Brakes, and Suspension
    you will be sticking too far out with +6mm offset especially with 295s. Those wheels are cast 1 pc. The bolt pattern is 114.3 which gives you the clue it wasn't designed for the Challenger. You would need the more expensive 2pc model to get them to make the correct offset for you. What you see...
  13. did I load tune wrong?

    Tuning/Data
    X2 What Rob446 said. The canned Diablo tunes were horrible. Sean sent me the his 93 tune and the car is like a 70's hot rod. I did a write up on this forum.
  14. YOUR best Challenger picture!

    Picture/Media/Art Post
    After all these years, I still stop and stare at your old yellow R/T Classic. Looks so correct from the factory in so many ways.
  15. YOUR best Challenger picture!

    Picture/Media/Art Post
    testing out my new Canon M50 camera, liking it a lot so far.
Top