I need some help.. I purchased my Scat Pack new in 2015 and it has approximately 60k miles. Upon driving home on a 3 hour trip, I noticed the engine felt like it was lacking power (almost as if it was pulling something). We stopped to eat lunch and I happen to notice the valve train noise was...
So i just bought a 2021 scat pack less than 4K miles on it. Installed the procharger myself (very easy to follow instructions btw). But i got it tuned and it felt great. Ofcourse i had to get on it a few times but within a few weeks of install i started having misfires and bad knocking. Mind you...
I have a catch can currently installed that I am replacing with a color matched one. The existing hoses have the metal caps on them. Any tips on how to get them to release from the PCV port? I can't seem to get the hose to come off of it
Planning to have my scat pack procharged and have drop in pistons put in for security. And should have long tubes before then.
Should anything else also be upgraded or replaced?
I looked around and didn't see th3 lifter issue reported much anymore was that just the 5.7?
Because car would...
This is the result of my FBO 392 on E85.
86mm throttle body
Ported intake manifold
2" Long tube headers
What's with the spikes at the end? I'm not the best at reading dyno charts, but I'm skeptical on whether or not this actually made 503whp or...
Have a 2019 Charger 392 Daytona with this ticking or fluttering noise coming from the drives side. Only can hear it while inside with the wind owns up ac off and radio down. Not mds because I hear it in sport and track while in manual. Any suggestions??
Hey guys, so as the title says, I want to do a mid delete and swap my stock resos for Vibrant 1794s. I know people usually put them in place of the mids but since the Vibrants are actually resonators, I feel like it should give a usual mid muffler delete type of sound but with more depth since...
I have a 2015 dodge challenger 392 srt 6.4L 6 speed with 51k miles and it started throwing camshaft sensor errors. The dealership couldn't find any thing wrong and cleared the codes and said to watch and see if it returns . Well it did . The engine cut power and camshaft error...
Hey guys thanks for dropping by! This place has been super helpful since I began looking to buy a challenger.
In August I purchased a 2020 DODGE CHALLENGER SCATPACK WIDE BODY!
Here she is when I took delivery from the dealership!
So I never really expected to mod out this darn thing but...
Have a pair of bare 6.4 Apache heads that I've decided not to send off for porting, because I want to start on a project car. There is some damage from broken valve. Machine shop can clean that up.
Selling for $700 obo. Located in Maryland
This is my first post on the forum and I just want to thank everyone for how helpful this community is I've learned a lot.
My main question is based around my 2015 Dodge Challenger 392 that has a Procharger Supercharger already installed onto it. I am looking to install Kooks long tube...
Hello everyone, I’m new to the forum as of tonight. Hope everyone’s staying inside and being happy.
My name is Carson and I just bought a challenger today, as I’m selling my Crossfire. I bought a 2018 plum crazy Scat Pack 392 Shaker, and it’s slated for delivery next week/ish.
Hey guys, Im new here and just made the jump from a 2017 R/T 5.7 to a 2018 R/T scatpak 392, both of which have MDS. What I noticed and am concerned about is that the 5.7 was much more MDS friendly, in the sense that it would engage as soon as it could and stay on for as long as possible. The 392...
Found on Auto Trader...2012 392, 6-speed (mandatory), in bright yellow (not in love with it...but anything except white or black is fine), black alloy wheels (is that stock?), 116,700 miles, new brakes all around...and a Southern car, that has spent its entire life in Texas and Mississippi.
Hey everyone. I found this kit on Modern Muscle Xtreme for the following:
454 HEMI Stroker Engine- 6.4L Based by Modern Muscle Performance
The MMX Standard Features!• Performance Tri-Metal Anti-Friction Coated Rod Bearings
• Performance Tri-Metal Main Bearings
• 4.250 Stroke Molnar Crankshaft...
Asking $34,349 located in NJ, and the description as well
"Still smells new garage kept 392 comes with an XPEL clear bra over front bumper and in door handle, Pettys garage bracing, Mopar Cold air intake with higher flowing R2C filter, hellcat intake, and custom intake. Car is stock tune and...