Dodge Challenger Forum banner

brakes

  1. Wheels, Tires, Brakes, and Suspension
    Long story short, is it possible to convert from single piston calipers to dual piston calipers? If so, how much of a headache would it be to do so? I’ve heard it can be done easily, that it’s a difficult conversion, and that it can’t be done, and I can’t seem to find anywhere that has a direct...
  2. Parts For Sale/Wanted/Trade
    Power Stop Z26 Street Warrior Performance FRONT Brake Rotors only (no pads). Summit Racing part number for the kit is K2560-26. I ordered the wrong rotors and they won't fit my car. I drove them for about 10 miles to "bed" the rotors before realizing the hub was scrubbing the caliper so i...
  3. Wheels, Tires, Brakes, and Suspension
    Hello all, My 2013 SRT will need new brake pads in the near future. I bought the car from the original owner, with 18K on the odometer in 2015 and, as far as I know, these are the brakes and slotted rotors that came from the factory. The car is close to 40k now and I drive it once or twice...
  4. 2015 to Current R/T Scat Pack 392
    Has anyone purchased or anyone know the part#'s for the Akebono Performance pads front and back for the 19' SP WB? Every moron online and in the stores that can order them, keep ordering the backs or just the wrong ones period. I've also been getting mixed info on the part numbers in my...
  5. 6.1L (2008 - 2010)
    Apologies if this has been addressed in a prior thread... I'm seeing similar things, but not quite exactly the same.. I purchased an 08 Srt8 about a year ago with pretty low miles (around 24K), though the brakes were close to needing replaced. About 4 months back, I replaced brakes and rotors...
  6. Wheels, Tires, Brakes, and Suspension
    I just bought my Scat Pack a few weeks ago with 26K mi and I believe it has the OEM rotors. I noticed they have rusted around the hub area where they're painted grey. They have also started to squeak (possibly due to glazing) so I am going to replace them with Powerstop Z26 rotors and pads...
  7. General Challenger Discussion
    My Challenger is a 2011. It has 7k miles on it and I got it new, so I know it's never been in any kind of accident/collision. This past week, I changed an actuator on the air conditioner. In order to change the actuator, I had to remove the felt panel that is under the driver side area of...
  8. Wheels, Tires, Brakes, and Suspension
    Hello Team:smile:, I know most of you have changed your brake pads. So was just curious to know what do you use for your car? I personally ordered hawk HPS 5.0 for occasional track racing. But would be using it as a daily driving too. What do you use? And how is your experience with it...
  9. R1 Concepts
    "Maximizing Brake Performance to the Highest Level! Calipers Aluminum Forged Calipers Available in 4, 6, and 8 Piston Available in Anodized or Painted in a variety of colors Special Colors; Raw Finish w/ Clear Coat and Black Hard Anodized Rotor Hat Aluminum Hat Fixed Rotor...
  10. Wheels, Tires, Brakes, and Suspension
    Hey guys! I apologize ahead of time if this is in the wrong section. My name is Kevin from R1 Concepts. We are an aftermarket performance brake manufacture company. Some of you may have heard about us and some may have not. We've been helping out the LX community for awhile now. We are a vendor...
  11. General Challenger Discussion
    Hey guys! I apologize ahead of time if this is in the wrong section. My name is Kevin from R1 Concepts. We are an aftermarket performance brake manufacture company. Some of you may have heard about us and some may have not. We've been helping out the LX community for awhile now. We are a vendor...
  12. R1 Concepts
    R1 Concepts| Carbon Alloy Geomet Rotors! We're happy to introduce to you all our new Carbon Alloy Geomet rotors! Manufactured for European and heavy vehicles, our High Carbon iron formulations (Molybdenum, Chromium, and Carbon) enhances noise dampening characteristics, while providing high...
  13. Speedlogix
    Now through 11/30 we are offering 10% off the price of all Hawk Performance Brake Products. To get the discounted prices please use code TS17-HK-10 at checkout. To shop all Hawk products: Hawk If you prefer to order via phone, call us toll free 888-SPD-LOGX
  14. Wheels, Tires, Brakes, and Suspension
    How it Works: Hurst Line/Loc - Roll Control Kits Application: Universal and vehicle-specific kits available. Part #1745000 - Hurst Universal Roll Control Kit Part # 5671517 - Hurst Roll Control Kit for 2008-2010 Dodge Challenger R/T and SRT8 Part # 5671520 - Hurst Roll Control Kit for...
  15. Hurst Performance Products
    How it Works: Hurst Line/Loc - Roll Control Kits Application: Universal and vehicle-specific kits available. Part #1745000 - Hurst Universal Roll Control Kit Part # 5671517 - Hurst Roll Control Kit for 2008-2010 Dodge Challenger R/T and SRT8 Part # 5671520 - Hurst Roll Control Kit for...
  16. 2015 to Current R/T Scat Pack 392
    For the people who have changed their brake pads (due to wear).. How long are the pads expected to last? I know this varies based on a lot of things but am curious what some of the other members have experienced.
  17. Challenger Issues & Problems
    Need advice from a brake specialist, please. My left front brake pads are too tight on my rotor and heats up really fast! In fact, it's the only wheel that won't turn freely. Should I a) bleed that caliper; b) replace the calliper; or c) try a new ABS / speed sensor? Or something else? 2012...
  18. Wheels, Tires, Brakes, and Suspension
    Hurst Part #5671517 Application: Fits the 2008-2010 Dodge Challenger Description: Designed with simplicity and ease-of-install in mind, Hurst’s complete Roll Control kits use the absolute best quality, pre-bent, double-walled, stainless steel brake line(s). In many cases, these hard-lines...
  19. Hurst Performance Products
    The Hurst Performance research and development department recently produced some “race ready” 2-piece rotor assemblies for various road course race teams and we ran a few extra sets for the discerning customer who wants the “BEST OF THE BEST” on his vehicle. These Hurst rotor kits are designed...
  20. Wheels, Tires, Brakes, and Suspension
    The Hurst Performance research and development department recently produced some “race ready” 2-piece rotor assemblies for various road course race teams and we ran a few extra sets for the discerning customer who wants the “BEST OF THE BEST” on his vehicle. These Hurst rotor kits are designed...
Top