Dodge Challenger Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. Builds
    First off I was in track transmission and traction control, and street suspension with paddles engaged and downshifted to ~4k before launch. Looking at getting long tube headers, Magnaflow X-mod cat back, and a cam kit with hellcat lifters. Only question is what can and how much power can I...
  2. Builds
    Hey guys, Pardon my ignorance, but I just recently came into ownership of a high mileage A8 (140k miles) scat pack challenger. The car was basically given to me besides some fees for title, registration, plates, taxes, etc. I decided to keep it and I'm just under $17k in total including the...
  3. General Challenger Discussion
    looking at a 2014 Dodge Challenger Ty with 125k miles but I can’t tell if it has a lifter tick because it sounds like it might. Does anyone know if the 14s are more prone to lifters, this one is also manual
  4. Performance Modifications
    2021 scat 6 speed, getting ready to make my face smile and my bank account cry. Any help with what cam i should go with? Everywhere i look i see something different, comp cam 270 or 274? Mopar cam? MMX? The build i have planned is as follows. Borla cat back, ARH long tubes 1 7/8s X 3in catless...
  5. Builds
    Bought a used 2015 SRT challenger 6 speed. Car came with Hellcat airbox, barton short throw, oil catch can and stock exhaust with magnaflow mufflers. I went ahead and added a stage 1 comp cam, stainless works LT headers and a custom 93 tune. Next I am going to add stainless works catback and...
  6. Builds
    I’m looking for some help or information on some possible routes I should go with my current setup (non daily) (strip/street) I just hit 45k miles (bought it at 33) and my 2nd gear synchros is shot and so is my clutch, Hoping my warranty is going to cover my tranny rebuild after reverting...
  7. 6.1L (2008 - 2010)
    I’m looking for some help or information on some possible routes I should go with my current setup (non daily) (strip/street) I just hit 45k miles (bought it at 33) and my 2nd gear synchros is shot and so is my clutch, Hoping my warranty is going to cover my tranny rebuild after reverting...
  8. Tuning/Data
    I have a 2020 scatpack with a ported manifold ported throttle body cai stainless works long tubes no cats and mmx max effort cam the shop i brought it to did a regular tune on it to just get it running its still surging bad when i start the car and it jumps foward when i put it into drive (sorry...
  9. Performance Modifications
    Hey guys brand new to registering to the forum but long time lurker of all the hemi related forums out there. I'm an owner of a '07 Charger R/T but as it's nearing the end of it's life I have my eyes set on a Scat Pack. I've been reading a lot about cam swaps and what seem to be overall...
  10. Performance Modifications
    Hello, This is my first post on this forum. I have a 2015 challenger rt (w/stp) which is stock atm. I am in the process of ordering the 274 comp cam w/ phase limiter and kooks long tube headers with catless midpipe and an a/f ratio monitor. I understand that the 274 cam makes more power in the...
  11. Parts For Sale/Wanted/Trade
    6.1 Headers - Midpipes - Cam - Coil Springs I have multiple parts for sale. All items are in good condition. They are all OEM parts off of my 2010 SRT Challenger. Please PM me if you're interested. Buyer will be responsible for shipping from Cincinnati. I am willing to meet within a...
  12. General Challenger Discussion
    I am looking to update my 2015 SRT Challenger with a new cam, long tube headers, PCM, CAI and tune. Can anyone recommend a company in the metro Detroit area for the install and tune? Thank you for your help I appreciate it.
  13. Bolt On's
    Hi all! I've been searching through the threads, but can't quite find anything on this, so if this has already been posted, I apoligize. I have a 2013 6-speed R/T with a dry-filter AFE intake, Kooks LT headers, custom off-road midpipe, and 2-chamber mufflers. Starting in the next few weeks...
  14. Builds
    Hey Guys, I have been looking into the 2.8 Liquid Cooled Supercharger by Kenne bell and as I was going down there website I was reading the "Dodge, Chrysler, Hemi Tech Tips" and after that is the " Do Not . . . " section and I was a little surprised when I read this... "DO NOT change stock...
  15. Bolt On's
    I'm not sure which cam kit I should get for my 2013 r/t, any suggestions? 2013 R/T Borla S-Type cat-back exhaust Mopar CAI
  16. 6.4L / 392ci (2011 - ?)
    Has anyone seen or heard of an aftermarket timing chain and sprocket kit for the VVT hemi? I was looking into a cam swap and wanted to upgrade the chain while I was in there. Thanks.
  17. Performance Modifications
    Hi y'all. New Chally R/T owner. I have one question. I plan on doing the basic mods that every challenger needs, intake, 180 thermostat, oil catch, headers, exhaust, tuner. But I also want to do a cam swap. Either from an srt or the highly recommended comp cam. I want this car to be a beast. But...
  18. Bolt On's
    Check out this video of my 2012 set 392 challenger with a comp cam.
  19. High Horse Performance
    We finished up this 392 Ported Heads and Camshaft package vehicle back in December on a 2012 Chrysler 300C SRT-8. The heads are stock 6.4L heads that have been CNC ported and upgraded with PSI Springs, Manley retainers and locators. The Cam is the Comp Cams 274 limiter camshaft and we also used...
  20. Bolt On's
    Ok so this will be my first balls deep modification so far. I have a 2011 R/T challenger with the auto trans and the only mods on thus far are a K&N intake, BT catch can and Diablosport Trinity T-1000. I also have a set of JBA shorties going on soon hopefully. I have a brand new SRT 392...
1-20 of 23 Results
Top