Dodge Challenger Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 40 Results
  1. Intake & Exhaust
    Anyone have these hooker shorty headers? Don’t know much about them . Just searched online for maybe new ones since my bbk headers are damaged after taking them off and checking them . Look at pics . Or can u have my current ones repaired? Any help would be helpful
  2. Intake & Exhaust
    Would they fit and are they worth the upgrade or should i go longtube ?
  3. Intake & Exhaust
    Hello I currently am in the market to put long tubes on my 2012 srt8 yellow jacket challenger. The local shop to me told me they sell Texas Speed long tubes. Has anyone put texas speed long tubes on their challengers? Seems like they are popular on other platforms but not so much on dodge. The...
  4. Intake & Exhaust
    Im curious, is there really a difference in sound or HP depending on the manufacture of headers as long as the material is the same? Using a set of Hooker, SSW or Kooks, all 309 stainless long tube headers and hook them up to the stock exhaust of my 18 Challenger 392 Hemi would they sound or...
  5. Performance Modifications
    Hola everyone! New here and new to the whole forum thing but anyway, I have a 2015 Challenger R/T Plus 6spd Manual that I bought about 2 years ago. I've owned a 2000 grand am GT( bleh ), a 2012 Jeep grand Cherokee ( gave to my mom ) a 2016 Chevy Silverado 4x4 Rally Edition with a 2015 Ford...
  6. Performance Modifications
    Hey guys, im new to this site but i liked how its full of like minded car enthusiasts so im giving it a shot. I have a 2021 dodge challenger, go mango scat pack and i wanted to get Kooks long tube headers with catted mids. I also wanted to get a performance/optimizing tune after the headers are...
  7. Challenger Issues & Problems
    Hey, all. I'm having a bit of a conundrum with some knock and funky ticking/ fluttering sounds on my 6.4. Last year I got some Kook long tubes and catless mids installed, along with solid motor mounts and a nitrous kit (which I really haven't used) and installed an email tune from a reputable...
  8. Parts For Sale/Wanted/Trade
    ISO OEM 392 Shorty headers and OEM 392 catted mid pipes for a swap on a 5.7.
  9. Intake & Exhaust
    Does anyone have the official tube sizing of the factory 6.4/392 headers? I am having to do stages of modifications to my 2016 SRT 392 and I dont want to do a full tune until I get the supercharger setup purchased, probably one year plus. This will never be anything more than a fun street car...
  10. Intake & Exhaust
    So I've been on the search for quite a while now looking for some Catless mid pipes that bolt directly to my factory exhaust on my 18 Challenger R/T. I can't find any that are specific for the 5.7 hemi, only the 392. I've seen videos of ones done but no part # provided. The only ones I've found...
  11. Challenger Issues & Problems
    I have recently removed my oem Catback exhaust because I am getting long tube headers and just wanted to run it open oem headers till I get them in for fun. After I took off the oem catback I got a check engine light. Any idea why?
  12. Intake & Exhaust
    I have been researching headers for my Challenger R/T 5.7L for quite a while now. Reading through a lot of posts and forums, collecting information and finding the best methods and routes to go and what I have concluded is Stainless Works 2" Long Tubes with High Flow Cats (I need them for...
  13. Intake & Exhaust
    I'm fairly new to the Mopar scene and am looking into getting the Kooks long tube headers and catted mid pipes but don't want to spend a crazy amount on a Catback exhaust. MY question is if I get the headers and mid-pipes can I still used my OEM Catback?
  14. Parts For Sale/Wanted/Trade
    3.6 procharger pulley with hardware $50 shipped crank pinning kit minus pin $75 shipped Dayco tensioner with about 20k miles, good condition $20 shipped. Aeroforce intercepter OBD gauge $150 shipped PLX Boost and SM-AFR wideband sensors with DM-6 multi-gauge - $125 shipped Driver side SRT front...
  15. Bolt On's
    Someone is selling headers and with CATs and pipes to mid section for $800. Is that a fair price? He said they were on his challenger for only 2 summers, they are in like new condition still. Next they came off a 2015 SRT8 392 and I have a 2010 RT 5.7L Will these fit my 5.7L ? Just looking to...
  16. Parts For Sale/Wanted/Trade
    6.1 Headers - Midpipes - Cam - Coil Springs I have multiple parts for sale. All items are in good condition. They are all OEM parts off of my 2010 SRT Challenger. Please PM me if you're interested. Buyer will be responsible for shipping from Cincinnati. I am willing to meet within a...
  17. Dodge Challenger R/T Specific
    Hey everyone this is my first post and I am very new to the thread. I was wondering what peoples opinions where of longtube headers for a challenger rt. I currently have Borla Catback ATAK exhaust with a K&N cold air intake with no tune. Would love some advice and maybe some sound clips of...
  18. Parts For Sale/Wanted/Trade
    Getting rid of a 2013 392 crate motor with only 175 miles. Along with it comes an alternator, ported throttle body, Kooks Long tube headers, and mid pipes. Great kit for an engine swap or project cars. The reason I'm getting rid of it, is do to me wrecking my 2012 challenger rt about a week...
1-18 of 40 Results
Top