Dodge Challenger Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 18 Results
  1. Wheels, Tires, Brakes, and Suspension
    Bought a 2014 RT recently. Has 275 up front and 315s in the back on 20 inch wheels. Dont know the offset of the wheels. I am not loving the wheel gap but I am worried about being able to lower it. I know the suspension could use some stiffness because if i am at high speeds and hit an intense...
  2. Wheels, Tires, Brakes, and Suspension
    I am looking for feedback/suggestions on lowering springs for a 2016 SRT392 with the active suspension. I bought my SRT392 used and it came with the Mopar Stage 1 springs P5155436 , not installed. I have seen mixed answers if they will work with my setup with the active suspension...
  3. Parts For Sale/Wanted/Trade
    I’m looking for Eibach pro kit for Scatpack/Hellcat.
  4. Wheels, Tires, Brakes, and Suspension
    I have a 17 T/A with the 5.7 in it and was wondering if anyone has put them on this car before. I looked at the Eibach Sportlines but was unsure whether they are the same fit as an RT. Also, on the Eibach website there was no listing for a T/A, only for the RT and Hellcat etc, so if anyone has...
  5. Wheels, Tires, Brakes, and Suspension
    Hello, I have a 2013 RT on 20x275s all around and I can't decide between going with the Eibach pro kit or the sportline kit. I keep looking at different pictures but none of them are consistent, they all show different amount of space between the wheels and I can't get a clear baseline for what...
  6. Wheels, Tires, Brakes, and Suspension
    I had a 2010 RT Challenger and totaled a few months ago. RIP:grim: https://www.dbl07.co/007-spy-car-dodge-challenger/ I was going for that 70's rake so I dropped the front with Mopar lowering springs 2008-2009 Part# P5155436 I also had 275/55 R20 in the back (which I had to beat the hell out...
  7. 6.4L / 392ci (2011 - ?)
    The Hurst Performance R&D department is looking for a 2009, 2010, 2012, or 2013 SRT-8 Challenger for a lowering spring test fit. We will need the car for 3 to 4 days to complete the work. The car will only be driven around the block to settle the springs before taking our final measurements...
  8. 6.1L (2008 - 2010)
    The Hurst Performance R&D department is looking for a 2009, 2010, 2012, or 2013 SRT-8 Challenger for a lowering spring test fit. We will need the car for 3 to 4 days to complete the work. The car will only be driven around the block to settle the springs before taking our final measurements...
  9. Wheels, Tires, Brakes, and Suspension
    I have a 2013 RT and recently put on new wheels and tires. I have 255/45/20 on the front and 275/40/20 on the rear. I'm wondering if there will be any problem lowering the car with a wider tire up front. I'm looking at going with the Eibach Sportline springs. Anyone who uses these what are...
  10. Wheels, Tires, Brakes, and Suspension
    I am in need of some help. I lowered my 2014 challenger RT with Mopar stage 1 lowering springs back in July and had it aligned, however, my vehicle has recently been pulling to the left. I took it in today to have the alignment corrected, but I was told I need the following parts to correct the...
  11. Parts For Sale/Wanted/Trade
    I have the original SRT springs off my 09 SRT Challenger for sale, they have about 40K on them. I installed lower springs on my car, these would lower your RT maybe close to two inches? I am asking $200 plus shipping, call me at 239-719-0074, thanks, Fred.
  12. Dodge Challenger SE/SXT Specific
    I'd like to lower my Redline 1.5-2". What is needed besides springs?
  13. Wheels, Tires, Brakes, and Suspension
    Hey Guys, I am trying to lower my 2010 Challenger R/T Classic Plum Crazy, However I ran into a issue, 2010 classics have Nivomat which will require me to get coilovers vs lowering springs because lowering spring will not work for Nivomat suspension. As you know coilovers are very pricy prob be...
  14. Parts For Sale/Wanted/Trade
    Looking for a Camber Kit: *Camber adjustable Front upper control arms and rear camber bushings* I lowered my Challenger on Eibach Sportline springs and have slight negative camber in the rear and quit a bit on the front passenger side. So I am planning to install a camber kit. Looking for...
  15. Wheels, Tires, Brakes, and Suspension
    Hey guys, have a 13 v6 challenger, I was wondering if anyone with experience lowering the car had any suggestions on which brand and model to use? I want it lower but not super slammed, just a nice lower look and dont want to have a horrible ride because of it. Is there a certain one that wont...
1-15 of 18 Results
Top