Dodge Challenger Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
1 - 7 of 7 Posts

·
Registered
Joined
·
98 Posts
Discussion Starter · #1 ·
My '10 rear deck light lamp assm has developed major cracks in it and basically looks like crap. The '10 lamp housing is about $475 for a new one. The '11 and up (PN 68059854AD) is over $125 cheaper. I assume it will fit without problems even with that sensor on the '11 and up? Connectors and mounting the same?

Inquiring minds want to know :D. TIA
 

·
Super Moderator
2016 SXT Plus Blacktop
Joined
·
26,719 Posts
68059854AD looks more flat
1007748

5028775AD looks a little curved?
1007749

A Guy
 

·
Registered
Plum 2019 SXT AWD
Joined
·
381 Posts
There are several aftermarket options for the pre-15 Challengers if you are okay with that. Sad to say looks like they are running about the same price.
 

·
Registered
Joined
·
171 Posts
My '10 rear deck light lamp assm has developed major cracks in it and basically looks like crap. The '10 lamp housing is about $475 for a new one. The '11 and up (PN 68059854AD) is over $125 cheaper. I assume it will fit without problems even with that sensor on the '11 and up? Connectors and mounting the same?

Inquiring minds want to know :D. TIA
Sorry to hikjack on a related note, can you incorporate the function of the external trunk button (11+) on a 2010 and earlier using the11+ panel ? I've searched and can find an answer
 

·
Registered
Joined
·
98 Posts
Discussion Starter · #5 ·
Thanks for the reply guys,

A guy: yeah seen those pix too but it looks like the angle the photos were taken,,

World: I had thought about the LED upgrades but I' haven't been totally sold on the idea. Still kinda gun shy on aftermarket body panel stuff lol

Fast: Not sure if it'll work, I doubt it would but I guess that can be part of my question too.
 

·
Super Moderator
2016 SXT Plus Blacktop
Joined
·
26,719 Posts
I looked at multiple pictures, and because there were changes made between 2010 and 2011...

There must be a reason that they don't show as interchangeable

A Guy
 

·
Registered
Joined
·
171 Posts
68059854AD looks more flat
View attachment 1007748
5028775AD looks a little curved?
View attachment 1007749
A Guy
11s have the trunk release button and therefore the plug is different. if you dint mind using wire taps, I'm sure it would fit and wok, it just has the dummy trunk release button. I have 15 LEDS on mine and I was able to adapt the wiring.
 
  • Like
Reactions: A Guy
1 - 7 of 7 Posts
Top