Dodge Challenger Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
I've spent a few years collecting all the components to swap out the audio in my car. Figured i'd go ahead and pot the finished product here. I did all the wiring and install the cabin area of the car and a local shop did the sub and amp rack, i wired the amps. So here you go. The equipment is for head unit: Pioneer P99rs, Stevens Audio hlcd full body under dash ran off of Mosconi Class A, Stevens Audio MB-8 in the doors ran off a Mosconi AS200.4, and B&C 18" ran off a Mosconi AS300.2

I started with completely gutting the car, then i applied deadener throughout the entire car. I then ran the power wires and speaker wires. Here's the pics.
 

Attachments

·
Registered
Joined
·
23 Posts

·
Premium Member
Joined
·
2,383 Posts
Wow!

You truly went to town to upgrade your sound system. I had a 2009 S/E. I upgraded the speakers, which helped...But in the end, the amp in the head unit was too lame.

Congrats, and thanks for posting the pictures.
 
1 - 6 of 6 Posts
Top