Dodge Challenger Forum banner
1 - 7 of 7 Posts

·
Registered
2011 SRT Challenger GWE
Joined
·
40 Posts
Discussion Starter · #1 ·
Could anyone tell me what the main be difference is between Chrysler 300 front and rear Suspension compared to my 2011srt challenger?
Someone swapped out the Suspension. Brembos are gone for sure .
 

·
Super Moderator
2016 SXT Plus Blacktop
Joined
·
28,106 Posts
As far as I can see, for the 300 Base, and 300 C, the front suspension is completely different, spindles, upper and lower control arms, etc. Just different designs and parts, no cross compatibility, at least 2011 to 2011

EXCEPT the 2011 300 Limited, which shares many front suspension parts

The rear suspension seems to share most if not all parts, all versions of 2011 300

Pull up 2 different tabs at Steve White, select model in each, select Front or Rear suspension and compare

A Guy
 

·
Super Moderator
Joined
·
17,441 Posts
the knuckles and spindles are unique for Brembo equipped models (SRT and later, Scat Packs) so the previous owner must have sold off or transferred the Brembos and swapped the standard Bosch brakes (and the spindles / knuckles ) for a 300 onto the Challenger
 

·
Super Moderator
Joined
·
17,441 Posts
Thanks what were the factory shocks on my '11 srt?
they would have been Bilstein shocks - yellow body color for both front struts and rear shocks
 
1 - 7 of 7 Posts
Top