Dodge Challenger Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hey all.. having some minor issues with the installation of my led concepts color changing drl boards for my Dodge Challenger.. I thought I had all the hard stuff done.. cutting the headlight apart installing the boards and resealing the light.. but I'm currently trying to figure out how to wire it up so my blinkers work in the front.. it has that profile pixel controller that plugs into my
Drl board and off of it there is three wires, ground, 12v source to dim them and a wire for the blinker.. I found that pin 4 on my headlight harness is the blinker, but before I spliced into it I wanted to double check so I ran jumper wires from the driver to passenger side light thinking that if I would turn driving side turn signal on I'd atleast get something this way I knew that would work but nothing..
 
1 - 1 of 1 Posts
Top