Dodge Challenger Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hey I got a question. I've seen that 6.2 headers will fit a 5.7 hemi challenger 2015 and up. My challenger is a 2013 challenger rt with a 5.7 hemi. just wondering if I can put the stock 6.2 headers on my 5.7?
 

·
Registered
2015 RT 5.7 M6
Joined
·
8,987 Posts
Welcome to the forum. I don't see why it would not fit the exhaust components are pretty much the same from 2009-2016 on 5.7 RTs and the main chassis is pretty much the same as well. Oh and the motor mount brackets for the RT are the same from 2012-2020.
 

·
Registered
Joined
·
225 Posts
Yes, 6.2L and 6.4L exhaust manifolds will fit the 5.7L. However you will require a 6.2L/6.4L mid-pipe to do this mod as the 5.7 and 6.2/6.4 manifolds are a different length.
 

·
Registered
2013 Challenger RT
Joined
·
169 Posts
If you do this make sure you replace the motor mount from SRT otherwise you will not have access to the motor mount bolt due to the manifold's clamshell sticking down blocking the bolt access if you ever need to replace the motor mount that is attached to the block. The SRT mount is angled towards the front of the car and awayMy caris from th manifolds clamshell as opposed to RT mount straight through. My RT is 13 as well.
 

·
Registered
Joined
·
4 Posts
Do you have a set of 2010 to 2014 stock midpipes I can buy? Returning my car to stock so I can trade it in. Thanks!
 

·
Registered
2010 R/T Classic 6M
Joined
·
947 Posts
Do you have a set of 2010 to 2014 stock midpipes I can buy? Returning my car to stock so I can trade it in. Thanks!
I have a set if you want them pulled off my '10 a year ago.
 

·
Super Moderator
2016 SXT Plus Blacktop
Joined
·
21,621 Posts
You can send a personal message and trade info, etc. Click on his name below his avatar and click on Start Conversation on page that opens

996631



A Guy
 
  • Like
Reactions: Frank Julian
1 - 9 of 9 Posts
Top