Dodge Challenger Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
186 Posts
Discussion Starter · #1 ·
Was curious if there is any vendor who produced an aluminum pan and filter for the 8HP70, for the Challenger.

PPE makes version for the trucks and now carries one for the 8HP45/50 for the Wranglers.

They dont list them for the LX cars, assume fitment and clearance.

Does anyone make one or are the only options the composit ones. The PPE add 2 qts on trucks and 1.5 qts on the Wranglers.

 

·
Super Moderator
2016 SXT Plus Blacktop
Joined
·
32,076 Posts
2015-2021+ Dodge Challenger - 5.7L V8 Gas and 6.4L V8 Gas with an 8HP70 / 8HP75 Transmission



A Guy
 

·
Premium Member
2019 Widebody challenger Scatpack
Joined
·
51 Posts
The one you listed will fit without any issues , the other one guy listed is for the trucks which will hit the cross member
 

·
Super Moderator
2016 SXT Plus Blacktop
Joined
·
32,076 Posts
Huh? Both are listed for the Challenger

A Guy
 

·
Premium Member
2019 Widebody challenger Scatpack
Joined
·
51 Posts

·
Registered
2015 RT 5.7 M6
Joined
·
11,867 Posts
Issue with the hp70 is the filter is apart of the pan , so depending on their filter material can be a issue (had an issue with this where the filter fibers were coming apart and clogging all the solenoids)
Yeah, saw a guy on the durango forum who bought a budget pan for his 8HP45 trans and you could see the filter material falling apart. Going to perform a fluid/pan swap on mine this 4th of July weekend and I am looking for the pan. Saw that the mopar sites show two version 68233701AA and 52854834AB that work for my trans. Not sure what the difference between the two are but I take it the 68233701AA is an updated version?

 

·
Premium Member
2019 Widebody challenger Scatpack
Joined
·
51 Posts
Yeah, saw a guy on the durango forum who bought a budget pan for his 8HP45 trans and you could see the filter material falling apart. Going to perform a fluid/pan swap on mine this 4th of July weekend and I am looking for the pan. Saw that the mopar sites show two version 68233701AA and 52854834AB that work for my trans. Not sure what the difference between the two are but I take it the 68233701AA is an updated version?

I just checked both those numbers on east coast mopars , the 52 number shows for 2022+ and the other shows for the other years but both for v6 cars
 

·
Registered
2015 RT 5.7 M6
Joined
·
11,867 Posts
I just checked both those numbers on east coast mopars , the 52 number shows for 2022+ and the other shows for the other years but both for v6 cars
So for my 2017 Durango GT (V6) both part numbers show as fitting (according to the Steve White Autoparts site) so not sure what the difference is? Although the 68*** shows 2013-2018 and 52*** shows 2018-2022 yet if I enter my VIN it shows either one is compatible for my DD.

Doh! I need glasses...it said 52*** may fit and says 68*** will fit. My bad, and thanks for making me double check.
Font Rectangle Screenshot Number Parallel
 
1 - 9 of 9 Posts
Top