Dodge Challenger Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
I dont know if you can do it yourself, most likely not since you need to install new igniters, and remove crash from srs unit to make it functional again or if you dont care you can just stick a bunch of resistor to kill the signal that you can do.

but if you want it back to original state you can try a repair company like still cheaper than buying new or used
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.