Dodge Challenger Forum banner
  • Hey everyone! Enter your ride HERE to be a part of December's Ride of the Month Challenge!
1 - 4 of 4 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter · #1 ·
I am looking to see what springs came on the SRT 392. I have a 2018 T/A 392 and the SRT 392 appears to sit 1.6 inches lower ground to roof. I also believe the springs have a lower spring rate than mine. It would be great if you could provide the height ground to wheel well too. Only looking for this on cars that still are on OEM springs.

Thanks
 

·
Registered
Joined
·
16,472 Posts
My 16 SRT has definitely settled a little in these 4 years and now at the fender arches is 29 1/2 inches front and 29 7/8 inches rear. When new I think it was 29 7/8 and 30 1/2.

The original springs on my 16 SRT are ZGF/ZVF front and ZJX/ZXX rear.

Googling the codes looks like 05181609AB and 60803469AC but don't hold me to it.

That front spring is also used on the Challenger R/T with Super Track Pack.

The T/A definitely uses different front springs that are stiffer, not sure about the rear although I believe they are different too. So I agree the SRT is more softly sprung and they use the adjustable shocks to stiffen it up when needed.




Sent from my SM-N960U using Tapatalk
 
1 - 4 of 4 Posts
Top