Dodge Challenger Forum banner

1 - 20 of 63 Posts

·
Super Moderator
Joined
·
13,329 Posts
Discussion Starter #1 (Edited)
Over the past 8 years, I have gotten many great ideas for appearance mods from other Challengertalk members.

I thought that it would be helpful for all of us to share our ideas.

Here are my mods, by category (i.e., interior, exterior, engine bay and trunk). List your mods, too, with photos.

Interior
MOPAR T-shifter (auto.)
“Challenger” stainless steel door sills
Stainless steel racing pedals (including dead pedal)
SRT 8 carpet patches (4)
Billet power seat control cover (driver seat)
Billet lumbar control covers (driver and passenger seats)
Acrylic cup holder “SRT” and “Challenger” accents (front and rear)
Stainless steel/carbon fiber SRT 8 door plates
Custom SRT sun visor decals.
Ravelco Anti-Theft device (with “SRT” logo)


Engine Bay
Billet Strut Covers (Beehive)
Billet Oil Catch Can (with stainless braided line & fittings)
Billet Fuse Box Cover (engraved- “Challenger”)
Throttle Body Cover (engraved- “Hemi”)
Billet Radiator Dress-up Kit (“SRT 8” and “Challenger” beverage delete disks)
Billet ABS Motor Cover
Billet Owner Signature ID Name Plate (with VIN# & build date)
Billet Oil Fill Cap (engraved- “Use Mobil 1 0-40W”)
Billet Power Steering Set (engraved- “Power Steering Fluid Only”)
Billet Washer Fluid Cap (engraved- “ Washer Fluid Only”)
Billet Radiator Cap Cover (engraved- “6.1”)
Billet Low Pressure AC Port Cap
Billet Transmission Cap Cover (engraved- “SRT”)
Stainless Steel Hood Latch
MOPAR CAI (with blue MOPAR decal)
Billet hood strut lift covers
Custom color Hemi coil pack cover lettering (orange)

Trunk
Billet strut lift covers
Embroidered “Challenger” carpet
Trunk lid liner

Exterior
"SRT" logo valve stem caps
Custom black license plate frame (rear) with orange "Dodge" (top) and "Challenger SRT 8" (bottom) lettering
Locking gas cap

Wheels/Tires
Gorilla locking lug nuts (with spinning sleeves)
Cooper Zeon RS3-G1, 275/40-20 Ultra High Performance All-Season Tires
 

Attachments

·
Premium Member
Joined
·
1,444 Posts
Exterior:

Cervinis Shaker hood
Classic Challenger and RT badging
Hellcat rear spoiler
Throwback-looking 18" Boss 338 wheels
Amber fog light lenses
SRT front spoiler
Removed grille badge
Vinyl tail light insert
Mopar splash guards

Interior:

Real Rosewood dash trim kit
Lloyds mats
Black Mopar T Handle
1970 TA style gauge face
Challenger script bash badge
Billet shifter plate
Blacked out shifter trim ring
Stainless sills
Red door piping
Mopar back-up camera w/Lockpick

Underhood:

Billet oil cap
strut covers,
fuse box cover,
dipstick handle
catch can
washer fluid cap
coolant cap
Hellcat ABS pump cover
Vintage Shaker decal
Richard Petty autograph :)
 

Attachments

·
Premium Member
Joined
·
1,260 Posts
Under the hood
 

Attachments

·
Premium Member
Joined
·
1,260 Posts
Under the doors
 

Attachments

·
Premium Member
Joined
·
1,260 Posts
Piping on door panels
 

Attachments

·
Premium Member
Joined
·
1,260 Posts
Petals
 

Attachments

·
Registered
Joined
·
811 Posts
I replaced my Powered by SRT covers with 392 HEMI, added Scat Pack Bee stickers to the cup holder area under the hood, MOROSO catch can and K&N CAI! I added Scat Pack Bee stickers to my rear stripe and Bee emblem to rear! I replaced the lug nuts with black, added the floating R/T center caps and R/T valve caps!
 

Attachments

·
Registered
Joined
·
2,185 Posts
Performance
Mopar Stage 1 Springs
Barton Short Shifter

Interior
Vinyl welt piping - eBay
Custom shift knob - Mr. Metal Man
Custom head rest spacers - Mr. Metal Man
Katzkin Leather seats (front and back) - sponsorship
Head rest embroidery (Thread Connections)
Amber LED Floor lights - Autozone
Amber LED Cabin lights - eBay
Custom made door sills - me

Engine Bay
Custom "Steel Curtain Challenger" theme
Hydro-dipped Valve Covers, Reservoir tank, top of CAI - Custom Functionz
Billet Technology (sponsor) Custom designed (by me) Fuse box cover, radiator cap, catch can, etc.
Custom made (DIY) ABS cover - me
Plenum Cover - American Car Craft, customized by me
Petty 2 Point front Strut Brace
Stainless Steel Strut covers
DIY Hell Cat CAI

Exterior
Custom designed (me), George Barris inspired Side Pipes with Badlanzhpe cutouts
"Steel Curtain Challenger" custom designed fender badge logos and hood stripes
Custom designed 3D "Challenger Script" rear badge
 

Attachments

·
Registered
Joined
·
1,067 Posts
Performance
Mopar Stage 1 Springs
Eibach 2895.310 front sway bar
Razor's Edge/Speedlogix Front and rear strut braces


Interior
Vinyl welt piping - eBay
Hurst T Handle shifter (core shifter)
Head rest embroidery (Jina)
Lloyd Dodge floor mats with AAR patch added (Car ID/Jina)
Hydrodipped wood grain interior accents
Challenger AAR badging



Engine Bay
Design cutz engine cover insert
Speedlogix ABS cover
Custom cover for fuse box
Charger air intake tube
Airaid CAI
Billet Tech catch can



Exterior
AAR side striping
2015 SRT 8 hood
SRT 8 spoiler with custom Challenger AAR badging
Hurst Stunner (black) 20" x 9" wheels
Mopar Hood Pins
E&G Classics Louvers
Amber fog light lens covers
Tredwear tire lettering
Yonaka Exhaust Tips

 

·
Registered
Joined
·
1,398 Posts
Not as much as I'd hoped at this point, but here's what I've got so far:


T/A Hood with "392 Hemi" badges:




Plain Bee on the front fenders:




Plain Bee replacing the DODGE lettering on the back:




Scat Pack sticker on the rear passenger window (my wife thinks it's too big and tacky...I think it give it just the right amount of 1970's Stank...and it's funny because she's the one that bought it for me)




Green Piping on the dash and console (I still need to do the door...and please ignore the dirty floor mats...I was doing some construction work this week. They're clean now)




Still want to do:

Torque Thrust wheels
Green piping on doors
Under hood billet accents
Kicking around the idea of a T/A Side Stripe
Custom Puddle Lights on the doors
Scat Pack embroidered headrests
 

·
Registered
Joined
·
6 Posts
I have the same door panel as you do and for the life of me, I can't get the welt piping to slide down the crack on the bottom of the door panel...rest of the panel is easy, bottom is a no go for me...is there some kind of secret? lol Any input is appreciated...
 

·
Registered
Joined
·
6 Posts
Piping on door panels
I have the same door panel as you do and for the life of me, I can't get the welt piping to slide down the crack on the bottom of the door panel...rest of the panel is easy, bottom is a no go for me...is there some kind of secret? lol Any input is appreciated...
 

·
Premium Member
Joined
·
1,260 Posts
I have the same door panel as you do and for the life of me, I can't get the welt piping to slide down the crack on the bottom of the door panel...rest of the panel is easy, bottom is a no go for me...is there some kind of secret? lol Any input is appreciated...
Yea it’s a pita ,,you need another person and very small screwdrivers , lot of patience.. I redid the panel, took of bottom half part on the door would not stay , also did my dash , arm rest
 

Attachments

·
Registered
Joined
·
94 Posts
I have yet to see what I think is one of the best exterior appearance enhancers carried over from 1971. Quarter scoops.
 

Attachments

·
Premium Member
Joined
·
1,260 Posts
Here are 2 mods I did the coolant tank , my wife hate the OEM.lol
So had one painted Body color , also battery + terminal cover
 

Attachments

1 - 20 of 63 Posts
About this Discussion
62 Replies
28 Participants
Ronan978
Dodge Challenger Forum
Challenger Talk, the online forum for discussions, reviews of Dodge Challenger, and all things SRT, Hellcat, and Demon.
Full Forum Listing
Top