Dodge Challenger Forum banner
1 - 3 of 3 Posts

· Registered
http://www.dragtimes
Joined
·
1,908 Posts
Not sure if any of u guys r into it but I have been doin it since I was a kid in jrs. I have a dragster I race in top but just got a 14 challenger rt and was wondering if they r consistent street cars. Was gonna run mine in foot brake a little. I have heard to wire the fan so it will come on when the switch is on and stay on so it will run cooler and the computer won't be messing with the timing. Need input. Thanks guys in advance!!!

Sent from AutoGuide.com Free App
I have 11 trophies for bracket racing my ’12 A5 392 in the 1/4 and few in the 1/8th. Good 17" DRs and a tune and these cars are very consistent. Get her to hook and turn off all the tq mgmnt nannies and it is all up to you on the line.
 

· Registered
http://www.dragtimes
Joined
·
1,908 Posts
I run these. Cheap, light and strong. I am currently running a 275 width but will be going to a 305 soon. That is about the max on a 9" rim. You have to grind out the centers a tad.
Results for 10080 - AmericanMuscle.com

10.5 may be too wide (may hit some suspension stuff).
 

· Registered
http://www.dragtimes
Joined
·
1,908 Posts
hone the center out to 73.5mm and you should be good to go. I also use open ended lug nuts but your stockers may work. I got the lug nuts from Discount tire for $2 each. Be sure to tell them not to exceed 30 PSI or so when the seat the bead so they don't deform the tire. M&Hs really stick...
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top