Dodge Challenger Forum banner

Cam for a whipple supercharger on 5.7L 2019 RT Challenger.

3022 4
Good morning y’all,

wondering what the best camshaft (cam kit) is that I should run on the whipple supercharger I have ordered. So far my challenger is completely stock, ordered the air-intake that comes with the supercharger. I do plan on Dyno Tuning in September when my supercharger is in. Would like some suggestions on how to probably swap the stock cam for something that will support the forced induction. any and all suggestions are appreciated. Thank you!

side note
i have done some research and found that maybe the best two choices I have are the 274 cam, and the Custom Grind cam. Thoughts?
1 - 2 of 2 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.