Dodge Challenger Forum banner

21 - 22 of 22 Posts

·
Registered
Joined
·
1,019 Posts
There is no need to worry about bent valves. These cars have had cam swaps for years now. And the majority of the good timers know what to do and how to do it. If you aren’t tuning this yourself. Find one of the good timers and you will be fine.
 

·
Registered
Joined
·
51 Posts
As long as they use a limiter and the cam is degreed in it will never bend the valves because of the tune. It is physically impossible. The only way it could bend valves is if the timing chain is a tooth off which would be caught by degreeing the cam or if you overrev it and float the valves.
 
21 - 22 of 22 Posts
Top