Dodge Challenger Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I was looking for a cam that can fit in my engine without having to change my lifters and installing the mds delete kit.

my car is 2016 challenger scat pack shaker
 

·
Registered
Joined
·
6,283 Posts
Personally I would not mess with a cam that did not require new lifters and deletion of MDS and VVT. Get it done and get the proper Torque Converter too, I learned the hard way and need to go back to the tuner for a Converter.
 

·
Super Moderator
Joined
·
15,981 Posts
most any aftermarket cams for the A8 applications are not designed around MDS -

there are some cams that can allow using the stock springs, but it compromises the overall power gains compared to the higher lift cams that can provide for more torque and horsepower gains

so unfortunately the A8 cam swaps involve pulling the heads to change out to non-MDS (M6 application) lifters
 
  • Like
Reactions: MiHiHemi

·
Registered
2016 Jazz Blue A8 Scat
Joined
·
892 Posts
Yes, there are cams like that.

I believe the Inertia Motorsports Apache Max cam is one of them.

Most people that do a cam upgrade are looking to change out the whole MDS system.
 

·
Registered
2015 SRT 392
Joined
·
2,988 Posts
Yes, there are cams like that.

I believe the Inertia Motorsports Apache Max cam is one of them.

Most people that do a cam upgrade are looking to change out the whole MDS system.
I just googled that cam and it's a Nice sounding piece! Cams for these cars are not cheap though, are they?
 
1 - 7 of 7 Posts
Top