Dodge Challenger Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
164 Posts
Discussion Starter #1 (Edited)
Aluminum 6.1 block, Mahle pistons, Carbon fiber air intake 6.4, hop not kit

Very good condition but one of the fastener holes for the air filter lid is stripped but its easy to fix. You get the air box/lid, filter and intake tube in the picture...not the boot or clamps. Im using those with the factory shaker air box but I will include the factory air boot and clamps that im not using and they will work in place of the boot and clamps in the picture.....$225 plus shipping. Original price for this box as $500.

Also have a Petty Garage Strut tower brace I cant use with the Shaker so its gotta go. In great shape...$150 plus shipping. SOLD!!!!!!!!!!!!!!

Used but not much hot not kit stage one and two....$275 plus shipping

Cuda style hood from True Fiber painted PW7....great shape $500 plus shipping.

Challenger replacement Grilles $70 each plus shipping

Coil set (8) off 6.1 $60 plus shipping SOLD!!

Used 6.1 rods, pistons and 2 spun a bearing other 6 are very good shape $100 plus shipping

New Challenger double pod pillar.....$90 plus shipping

6.1 Aluminum block.... this was a mclaren block that was never used. Its setup for a sump but I planned to just use the OEM pump and attach a remote filter to the AN fittings in the block. 1800.00 plus shipping

Mahle 4.08 pistons, rings and pins HMI095080I12 $550 plus shipping
 

Attachments

·
Registered
Joined
·
164 Posts
Discussion Starter #3
Its made by Petty Garage and I lowered the price to 150.00
 

·
Registered
Joined
·
164 Posts
Discussion Starter #4
Sold brace and added a few more items.
 

·
Registered
Joined
·
164 Posts
Discussion Starter #5
another item added
 

·
Registered
Joined
·
164 Posts
Discussion Starter #6
bump and more added
 
1 - 6 of 6 Posts
Top