Dodge Challenger Forum banner

Challenger doors

857 Views 2 Replies 2 Participants Last post by  Wildwill2020
Hi I got t-boned in my 2009 Dodge Challenger and the drivers door is smashed pretty bad. I found a newer 2017 in a savage yard with a perfect door. The difference is that the door handle is different from what I can see. Will this fit my 2009? I’m just wondering because I could replace both doors if they will fit.

Automotive tire Tire Motor vehicle Wheel Vehicle
Table Glass
Vehicle Tire Car Automotive tire Alloy wheel
1 - 3 of 3 Posts

· Super Moderator
Joined
·
18,738 Posts
The doors will interchange - but the '11+ door handles won't have the Keyless Go function with the '09 - the systems are different.

Not certain about the door harness wires since the newer design has Keyless Go entry and if there's a separate connector for that or if there's a different master connector used between the '08 - '10 vs. '11 - 14.
 

· Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
The doors will interchange - but the '11+ door handles won't have the Keyless Go function with the '09 - the systems are different.

Not certain about the door harness wires since the newer design has Keyless Go entry and if there's a separate connector for that or if there's a different master connector used between the '08 - '10 vs. '11 - 14.
Could I take the harness from my old doors and put them into the new doors I wonder and have the keyless entry at least.

I just know the door is creamed pretty bad. I was told it can be fixed but I don’t even see how it would be possible without having lots of filler
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top