Dodge Challenger Forum banner
1 - 1 of 5 Posts

· Premium Member
3,273 Posts
Bolt heads get chipped by installing, banging with the wheel when installing or maybe even rocks - check the clearance between the wheel and bolt head it is pretty close.

When I remove/install the wheels, I put some tape over the bolt heads just in case.

I had a chip like that and touched it up with Viper red and it is still OK over a year later.

Another member said that a Testors model paint red was a perfect match but I have not tried any yet.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.