Dodge Challenger Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
129 Posts
Discussion Starter #1
Any body useing drop in 2618 ptistons.
What head gaskets used / what compression ratio / and what boost would be achieved, I'd like to add boost to. 6.1 but not be held to 6 - 8 psi
 

·
Registered
Joined
·
3,544 Posts
i used stock mopar gaskets. 12 lbs on mine. the compression is higher than i wanted i wasnt going to run thicker gaskets to gain very little
 
1 - 2 of 2 Posts
Top