Dodge Challenger Forum banner

1 - 7 of 7 Posts

1,488 Posts
Discussion Starter #1 (Edited)
Up for sale is my Beautifully Customized 2011 Challenger SRT8 Hemi in GREEN WITH ENVY


Yes, I am asking at the top end of value.
But, she is pristine with $15K in custom mods, Cuda body parts, and airbrushed fading stripes, qtr panel graphics, and MOPAR logos.
*** You are getting pristine paint only 3 years old; not the 2011's 9 year old GWE paint.
And she has ceramic coating and a number of special mods.
There are more specifics in my Craigslist ad.

2011 Dodge Challenger SRT8, 392 HEMI, Beautifully Customized
57K Miles; auto trans
Asking $28,000 OBO
3 years ago the black vinyl stripes were removed; and replace with custom airbrushed fading stripes and logos; then new clearcoat ( 6 coats); $12K in custom paint alone!
Limited Ed 2011 Green with Envy Color (GWE)
Paint only 3 years old!
New windshield!
New Michelin front tires.
New Interstate Premium Battery

Performance Mods: RC2 Black Hex Intake System;
DIY FlexiDip Green Intake Tube, and radiator hose
DIY modded Billet Tech Catch Can and tubes
MOPAR Deluxe SRT Aluminum Wheels (one extra new deluxe wheel)
Michelin Pilot Sport AS3+ Tires new Spring 2017

Body & Paint: Air Brushed Stripes and Custom Graphics by, ($12K in paint alone)
FLUID CONCEPTS Body and Paint, Moore, OK

Body Mods: Aftermarket AFR Cuda Grille
DIY Modded X-Lume LED "SRT" Badge
Cervini Rear Wing, Hydrodipped Mock hood pins

Engine Bay: ** DIY LED LIGHTED, Custom MOPAR "M" CLEAR TOP FUSE BOX (one of a kind)
DIY painted Under hood Accessories and Strut Tower caps, and MOPAR Strut Bar
Carbon Fiber Hydrodipping engine bay trim by Fluid Concepts
DIY Custom paint and air brushing of hood insulation/"Piston Pete" Logo
Custom painted engine Half Covers; "Parts for Your Car"

Interior: Custom DIY DashMat Trim and Logos
Custom Green Seat Belts by Seat Belt Planet, OKcity
DIY Green dying of leather seat stitching
Custom MOPAR Logo Embroidery of head rests and rear arm rest,
Kevin Gunder, OKCity
3G Customz Door props, DIY painted
DIY Custom painted Black Anodized door sills
DIY dyed, painted, and bound SRT Floor Mats, 2 sets, plus front Weathertech front mats
Carbon Fiber Dipped Dash Bezels, Fluid Concepts
DIY painted Monet T-Handle Shifter
DIY painted trunk lid liner with custom Lighting Platform, and separate 12V battery

Extra Deluxe SRT wheel
10 x 10 pop up tent, logoed, with chair and tent weights!
Car Cover
Novistretch Protective bra for front end
Frank L.

There are more specifics in my Craigslist ad....
Plenty of great pictures on my Craigslist ad...

1,488 Posts
Discussion Starter #3
Doing Great!
I pretty much finished up the Panel Conversion early this past summer.
Added Am Racing Torque Thrust wheels.
Now I am working on creating a DIY set of headlights from the Euro Morette headlight Masks.
To have bought Morette complete assemblies would have been 700eu EACH! :rolleyes:
So, I just purchased the outer shell/masks.
I also wanted to be sure I had Hella Projector high beams that they do not use.
I will not install them until after the spring weather breaks.
Now waiting on a Pteazer Full Retro front grill.

I have a full complete thread with pictures and explained details on the PTCruiserLinks Forum....


549 Posts
Wow!!....the SRT that is....I always thought those were...and still are...the best wheels ever produced for these modern day challengers
1 - 7 of 7 Posts