Dodge Challenger Forum banner
  • Hey everyone! Enter your ride HERE to be a part of October's Ride of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
581 Posts
Discussion Starter · #1 ·
And I'm super pleased with it! The things I like most about it are that it's thin. Thinner than I was expecting, but that's good because it sits flush with the rest of the front end. And, it's made of steel and painted to match the car using Chrysler colors. I know a lot of people use the Billet Technology nose badges because they are cheaper and you can get things etched into them (Which is cool), but they seem to sit up a little bit higher from the rest of the body, and that bugged me, mainly because I wanted to use an old school chrome Fratzog emblem on top of it, and i thought it would look better if the badge was flush. Also, the BT ones just come in "black". I really wanted to make my nose badge look as "out of the factory" as possible.

Bad news is, they are just about twice as expensive as the BT badges. They'll run you $75 + $7 shipping. But, the fact that they used chrysler paint and that they are hand fitted in the shop to an OEM Challenger front end sold me.

The order page for this badge was actually taken down because they thought they had lost the file used to cut these, but they found it. So, if you want one, you can just email them here: [email protected]

Here's an archived version of the order page so you can see what colors they can paint etc.. They will also put a vinyl Mopar logo or pentastar on it for you. Just dont order from this page as it is broken:
https://web.archive.org/web/20130914081945/http://jmbperformance.com/store/product_info.php?products_id=391

Pics of mine:
 

Attachments

·
Registered
Joined
·
202 Posts
And I'm super pleased with it! The things I like most about it are that it's thin. Thinner than I was expecting, but that's good because it sits flush with the rest of the front end. And, it's made of steel and painted to match the car using Chrysler colors. I know a lot of people use the Billet Technology nose badges because they are cheaper and you can get things etched into them (Which is cool), but they seem to sit up a little bit higher from the rest of the body, and that bugged me, mainly because I wanted to use an old school chrome Fratzog emblem on top of it, and i thought it would look better if the badge was flush. Also, the BT ones just come in "black". I really wanted to make my nose badge look as "out of the factory" as possible.

Bad news is, they are just about twice as expensive as the BT badges. They'll run you $75 + $7 shipping. But, the fact that they used chrysler paint and that they are hand fitted in the shop to an OEM Challenger front end sold me.

The order page for this badge was actually taken down because they thought they had lost the file used to cut these, but they found it. So, if you want one, you can just email them here: [email protected]

Here's an archived version of the order page so you can see what colors they can paint etc.. They will also put a vinyl Mopar logo or pentastar on it for you. Just dont order from this page as it is broken:
https://web.archive.org/web/20130914081945/http://jmbperformance.com/store/product_info.php?products_id=391

Pics of mine:
Justin does great work! And his new shop is only 10min from my house! The emblem looks great, I'm thinking about getting one of his catch cans and fuse box cover. He just needs to update his site for all of the products he offers.
 
1 - 2 of 2 Posts
Top