Dodge Challenger Forum banner

Hardware to attach 392 lip

868 3
Anyone know exactly what hardware is needed attached 392 lip on my RT

Sent from AutoGuide.com App
1 - 4 of 4 Posts

· Premium Member
Joined
·
1,532 Posts
You will reuse your existing hardware, plus you'll need about a half dozed plastic rivets and a rivet tool. I just did this yesterday myself.
 

· Premium Member
Joined
·
1,532 Posts
Maybe 90 minutes, I got the bumper off and swapped the spoilers, then got called away and finished it a few hours later. The lip on mine will move about an inch up and down, along with the center of the bumper cover below the lower grille, so I may have missed something on reassembly. I will probably pull the cover back off this weekend just to make sure, I hate being called away in the middle of a project.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top