Dodge Challenger Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
569 Posts
Discussion Starter #1
This photo is part of the rear end housing from a modified 2016 Hellcat. Happened a few nights ago at Route 66 Dragstrip just south of Chicago. The PCP HC was running in the low to mid 10s right before this happened. The car was just coming off the line when all "Hell" broke loose.
 

Attachments

·
Registered
2017 challenger hellcat A8
Joined
·
2,020 Posts
I Dare explodes not implodes
 
  • Like
Reactions: PSM450

·
Super Moderator
Joined
·
16,495 Posts
time to upgrade to the Demon differential - stronger gearset and stronger case.
 

·
Registered
Joined
·
15,607 Posts
There's a bolt on brace now available to strengthen the case.


Sent from my SM-N920T using Tapatalk
 

·
Registered
Joined
·
15,607 Posts
might want to tighten up the bolt on the left side [gap]
Haha yeah, found that pic online, definitely loose!

Sent from my SM-N920T using Tapatalk
 

·
Super Moderator
2016 SXT Plus Blacktop
Joined
·
22,657 Posts
This photo is part of the rear end housing from a modified 2016 Hellcat. Happened a few nights ago at Route 66 Dragstrip just south of Chicago. The PCP HC was running in the low to mid 10s right before this happened. The car was just coming off the line when all "Hell" broke loose.
Well there's your problem...

A Guy
 

·
Vendor
Joined
·
12,859 Posts
there's a good chance the issue was not the differential but the axles, what we have seen in the past, the axle breaks and take out the differential
Luke
 

·
Premium Member
Joined
·
1,664 Posts
HELL

This photo is part of the rear end housing from a modified 2016 Hellcat. Happened a few nights ago at Route 66 Dragstrip just south of Chicago. The PCP HC was running in the low to mid 10s right before this happened. The car was just coming off the line when all "Hell" broke loose.
I think it's more like " ALL HELLCAT BROKE LOOSE"
 
1 - 14 of 14 Posts
Top