Dodge Challenger Forum banner

hood adjustmet

1096 Views 2 Replies 3 Participants Last post by  GreatAmerican
Does anyone know if possible or how to adjust the hood side to side gap along the fender and hood on the driver side is wider than the passenger side.
1 - 3 of 3 Posts

· Registered
Joined
·
1,624 Posts
There is side to side "play" when you loosen the hood hinge bolts which will allow for the adjustment. Mine was not adusted well when I took delivery from the dealership but I didn't notice it until a couple of days later. I ended up aligning it myself. I had gotten mine to where it's pretty good, but its still not great.....such is life with a mass produced vehicle.:( Just be cautious so as not to adjust it too far to either side or the back corner of the hood will make contact with the upper rear edge of the fender when you fully open it.
 

· Premium Member
Joined
·
17,241 Posts
Be careful when adjusting your hood from side to side. If you have hood stripes, they may end up not being aligned properly.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top