Dodge Challenger Forum banner
  • Hey everyone! Enter your ride HERE to be a part of October's Ride of the Month Challenge!
1 - 6 of 6 Posts

·
Registered
Joined
·
529 Posts
Discussion Starter · #1 ·
Hi,
I am considering purchasing the lockpick and license plate camera. Has anyone done this? Are the any tutorials on line to show how to route the wires?

Much thanks,
Harry
 

·
Registered
Joined
·
143 Posts
Do a search in this forum. There is a good post that made it very straight forward for me when I did it last fall. Basically you remove the back seat and the panel on the passengers side in the back seat area. Then under the door sills and the kick panel in the passenger front seat floor board area. All together it took me about an hour. I used a bent up wire coat hanger to get the cable through the trunk area into the back seat area.
 

·
Registered
Joined
·
64 Posts
Run the wires over the roof on the outside of the car like a satellite installer tried to do one time when hooking things up at home. :scratchhead:
 

·
Registered
Joined
·
529 Posts
Discussion Starter · #4 ·
Do a search in this forum. There is a good post that made it very straight forward for me when I did it last fall. Basically you remove the back seat and the panel on the passengers side in the back seat area. Then under the door sills and the kick panel in the passenger front seat floor board area. All together it took me about an hour. I used a bent up wire coat hanger to get the cable through the trunk area into the back seat area.
found part 1 but there is no part 2. Also, it would be great if someone did a writeup with pics.
 
1 - 6 of 6 Posts
Top