Dodge Challenger Forum banner

How do I route the LockPick rear license plate camera

2K views 5 replies 5 participants last post by  Masked Man 
#1 ·
Hi,
I am considering purchasing the lockpick and license plate camera. Has anyone done this? Are the any tutorials on line to show how to route the wires?

Much thanks,
Harry
 
#2 ·
Do a search in this forum. There is a good post that made it very straight forward for me when I did it last fall. Basically you remove the back seat and the panel on the passengers side in the back seat area. Then under the door sills and the kick panel in the passenger front seat floor board area. All together it took me about an hour. I used a bent up wire coat hanger to get the cable through the trunk area into the back seat area.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top