Kenne Bell 148mm throttle body
Join the discussion
Recommended Reading
-
Porting a eforce 2300 supercharger
Forced InductionTrying to get these iats down for some more power. After forging my motor and going to the 2.75 sc pulley I ended up losing a bit of power ?. Had to go with a emp reprogrammed water pump ditch the stock edelbrock heat exchanger and go with the whipple oversized heat exchanger. That made a huge...- 14
- 861
-
Twin 50mm turbos for 392
Forced InductionHey guys, a local guy is selling his custom made turbo kit off his 5.7 challenger. It uses 2 50mm turbos, with a beautifully done header setup, and all the piping and intercooler for $1500. He claims he made 560whp and ran 10.90's in his 2017 R/T. He went to a larger single with his forged...- 5
- 427
-
WB_SCAT19 · updated
-
Any Magnuson 392 guys or gals around?
Forced InductionI was hoping someone could share some experience on the Magnuson Superchargers on a 392. How do they perform on a other wise stock 392 with 6lbs of boost? Anyone here have one? Thanks- 0
- 119
-
WB_SCAT19 · updated
-
Torqstorm Superchargers
Forced InductionGood evening everyone! I want everyone to know I'm going with their 392 kit on 6psi. I'll be starting this process very soon. I will be well documenting this whole process. I will be doing all the piping myself, intercooler fitting and doing so then old fashion hot rod way. In hope to...- 32
- 3K
-
WB_SCAT19 · updated
-
Water/meth pump location question
Forced InductionI’m installing a water/meth injection system and could use some help with the pump location. I’ll be tapping the washer reservoir instead of using a new tank for the meth. If anybody with a 2011+ who has meth injection could let me know where they mounted their pumps it would be a big help...- 2
- 135
Join now to ask and comment!