[RockSRT8]

Installed the matching e-brake and dead pedal from ultimatepedals. Photo is a bit grainy due to low light but looks sweet and has a really nice feel. I did not want to drill holes in the floorboard for the dead pedal nor drill through the e-brake pedal so... for the dead pedal I used extra heavy duty velcro and the adhesive side down on the floor. It's locked in tight yet removable any time. For the e-brake, I removed the rubber cover and used super glue to adhere the aluminum pedal. It too is on tight yet I can pry it off if need be without damage or a leftover hole. Perfect match of brightness down below :bigthumb:

 

[charginscott]

sweet - do you have a link to the pedals?

 

[jcgrady]

I went with the Mercedes ebrake cover P/N 203-430-00-84 per an older thread:
Ebrake cover thread

 

[aarcuda]

i did the mercedes e brake pedal too. it matches perfectly and went on without needing a mod

 

[RockSRT8]

sweet - do you have a link to the pedals?

Sure. ULTIMATE PEDALS

If you decide to order, you'll need to select the Charger version and in the notes section indicate Challenger. They have the correct Chally template.

 

[RockSRT8]

I went with the Mercedes ebrake cover P/N 203-430-00-84 per an older thread:
Ebrake cover thread

That sure beats super glue or drilling ! :thumbsup: