Dodge Challenger Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1 (Edited)
*** Car didn't sell at a good listed price, so decided to keep it rather than give it away.

Hi all, I'm about to list my 2015 Dodge Challenger Scat Pack and pulled off all of my aftermarket parts. All the parts have been previously installed, but are in an excellent, nearly new condition. I started adding pics of the parts and will add the rest as soon as i can; in the meantime, please let me know if there is something specific you want to see pictured. Thanks for looking and please get back to me with any questions!

No longer available Billet Technology Custom Full Etch 2015 Rumblebee on Black Shifter Ball (threaded for Barton Flat Stick 12mm x 1.25mm; originally paid $103.44 including shipping)




No longer available Billet Technology Custom Full Etch 2015 Rumblebee on Black Center Caps (Black-30; Rumblebee (Full Etch); 2.5"; Wheel Type:Forged; originally paid $250.69 including shipping)


No longer available Billet Technology Signature Series Catch Can For 392 HEMI (Charger, Challenger, 300) (Satin; Z Bracket; Braided Line-Satin Hose Ends; Brass Fittings; originally paid $195.44 including shipping)


No longer available Billet Technology 6.4L HEMI Under hood kit 2011-2018 (Satin; Engrave Choice-Under Hood:6.4L; Vehicle: Dodge Challenger Manual; Year:2015; originally paid $159.97 including shipping)


No longer available Wet Okole Dodge Challenger Standard Color (Black) Rear 60-40 Seat Cover (ordered for 2015 R/T Scat Pack w/ Leather and Armrest-cup; originally paid $312 including shipping)


No longer available Covercraft Custom Dustop Indoor Car Cover (ordered for 2015 Dodge Challenger Scat Pack w/ 2 mirror pockets and sharkfin antenna; color: taupe; should fit 2011-2018 Challengers, but please confirm; originally paid $279.50 including shipping)

Sold 09-16 BARTON SHIFTER w/ White Ball and Polished Aluminum Flat Stick (was originally brushed stick but I had it polished by a local polishing guy; originally paid $474 including shipping, not including polishing)

Sold Challenger Hellcat Headlamp Ram Inlet Cold Air Intake Box & Duct (will also throw in usable 68172459AA Challenger Hellcat Air Filter w/ 18K miles; originally paid $97.22 including shipping for the airbox and inlet and $36.82 for the filter)

Sold GENPARTSCO Direct Inlet Port Screen (D.I.P.S.) VR+ (originally paid $39.99 including shipping)

Sold ProClip 2015-2018 Dodge Challenger Angled Dash Mount (originally paid $36.49 including shipping)
 
1 - 3 of 3 Posts
Top