Dodge Challenger Forum banner

1 - 2 of 2 Posts

·
Premium Member
Joined
·
424 Posts
Discussion Starter #1 (Edited)
In my quest to convert my 2010 Challenger to 2014 leather seats, I've run into my next problem - the body harness connectors are VERY different from the 2010 car to the 2014 seats. Does anyone have good info on the connector pinouts so I can hopefully get this finished?

This is just for the drivers seat as the passenger seat is manual.

Thanks in advance!

This appears to be my 2010 drivers seat connector: http://connectors.dcctools.com/details.htm?id=67852&print=1
 

·
Registered
2015 RT 5.7 M6
Joined
·
8,846 Posts
In my quest to convert my 2010 Challenger to 2014 leather seats, I've run into my next problem - the body harness connectors are VERY different from the 2010 car to the 2014 seats. Does anyone have good info on the connector pinouts so I can hopefully get this finished?

This is just for the drivers seat as the passenger seat is manual.

Thanks in advance!

This appears to be my 2010 drivers seat connector: Mopar Connection Repair Kit
Yup, the mopar connection repair site is my default go to. In the past, I have used Alldata which sometimes had more details. I may finally roll the dice and get a $30 1 year subscription to see if they have more details about wiring layout as I have a project that needs more than a pinout.

http://www.alldatadiy.com/index.html
 
1 - 2 of 2 Posts
Top