[wedge79]

Hay Guys I am kinda New to the Challenger as I have been Old School mopar all my life till now . Own a 69 Road Runner Pro Street .
So anyway I got a Killer deal on a set of 305-30ZR20 Nitto NT555G2's
You think they will be to short ? I want to get wider wheels for he rear but hate to put a real short tire on then hav it look weird ?
Anyone running 30 on there car ?
Sorry for all the Q's but you guys have been there done that so best to ask. Never to old to learn !!
I want a Pro street look .

 

[dodgeboy90501]

Are talking about running these on stock rims? I ran 315/35/20 on a 20x10.5 rim. Same tire also.

Sent from my SM-G975U using Tapatalk

 

[A Guy]

If it were a 35 it wouldn't be too bad. A 30 is quite a bit shorter

https://tiresize.com/comparison/

A Guy

 

[wedge79]

No I am Planning on going with Wider Rims.
And yes that's what I was thinking also that they are to short ?!

 

[scott0]

yes too short, you need a 35.......


Sent from my iPhone using Tapatalk

 

[wedge79]

I would like to fill the rear wheel well with the Big Meat look. So should I get a 315/35 ? Or is there a better size to fit in there ? I already am running a 3:91 gear with a 6 speed so gearing is no issue .

 

[A Guy]

The stock sizes are 245/45 or 275/40, so the 315/35 is the size that is the same height. With the correct offset wider wheel, most have no/little clearance issues. Those that do have issues can usually correct with some massaging of the plastic inner fender.

There are many choicess in 315/35 as well

A Guy

 

[bigblacknurse]

so 315 fits in the front with no problem?

 

[wedge79]

I don't think I want to run them on the front. Just in the rear for that look .

 

[dodgeboy90501]

Like I stated before, I ran a 315/35/20 on a 20x10.5 with + 22 offset with no rubbing in the rear. You can run a 20x11 also in the rear with the correct offset.

Sent from my SM-G975U using Tapatalk

 

[A Guy]

so 315 fits in the front with no problem?

In the front, you'd need a 275, possibly a 285 with the right tire/wheel offset. If you want to go square, 275's all around will work

A Guy