[Silent Thumper]

Hey Guys,

I didn't like the wheel options for the 2023 WBSP I ordered in Granite this past December (just sent to the body vendor, whatever that is) so I went with the standard Devil's wheel.

Does anyone have any experience with Vicrez wheels, particularly this one?

 

[dragons layer]

I don't with that brand but the offset is correct at -2.5. I went with Hellcat II from Voxx from Discount Tire with no issues, in case you are looking for alternatives.

Voxx Replica Hellcat Wheels & Hellcat Rims On Sale

 

[Silent Thumper]

I don't with that brand but the offset is correct at -2.5. I went with Hellcat II from Voxx from Discount Tire with no issues, in case you are looking for alternatives.

Voxx Replica Hellcat Wheels & Hellcat Rims On Sale

Yes I've been looking at those to but seem to only find them with the -3mm offset and not -2.5 if that makes a difference.

How is the quality with those wheels and did you have to use any type of hub rings on the backside?

 

[dragons layer]

Yes I've been looking at those to but seem to only find them with the -3mm offset and not -2.5 if that makes a difference.

How is the quality with those wheels and did you have to use any type of hub rings on the backside?

After consulting with SRT on my WB build, they said that I could go as far as -9 so tires are even with flares. Voxx technical support also advised the same. Double check with manufacturers tech support but I think you'll be fine. Attached is my profile at -2.5.

 

[dragons layer]

Yes I've been looking at those to but seem to only find them with the -3mm offset and not -2.5 if that makes a difference.

How is the quality with those wheels and did you have to use any type of hub rings on the backside?

The wheels are a very good quality, with no issues. There is no need for spacers as this is the same fit for the WB. You will need a new set of lug nuts for these wheels.

 

[snobrdrdan]

Yes I've been looking at those to but seem to only find them with the -3mm offset and not -2.5 if that makes a difference.

How is the quality with those wheels and did you have to use any type of hub rings on the backside?

No hub rings are needed

And it's only a 0.5mm difference. You won't see or notice it, lol

 

[Challenger T/A 70]

I don't with that brand but the offset is correct at -2.5. I went with Hellcat II from Voxx from Discount Tire with no issues, in case you are looking for alternatives.

Voxx Replica Hellcat Wheels & Hellcat Rims On Sale

I also went with the Voxx Hellcat II wheels as well last year and have been very happy with them!

 

[cruiserdan]

No hub rings are needed

And it's only a 0.5mm difference. You won't see or notice it, lol

0.5mm is ~20 thousandths of an inch. That's less than half the spark plug gap.

 

[Slidd]

The Demon and Super Stock run 18's and the offset on those 18x11 wheels is -4.5 mm.

Sent from my SM-N960U using Tapatalk

 

[zekenator]

Not to hijack the thread but this seems like exactly the time and place to ask this...

When I get my SPWB, I will be wanting to get an extra set of wheels and tires for drag racing and road course fun. I LOVE the look of the Demon wheels, I've been looking (maybe not in the right places?) but cannot seem to find any in the correct size/width/etc that would fit my '23 SPWB. I think for drag racing and whatever else, those wheels would look so sick... ?