Dodge Challenger Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
1,059 Posts
Discussion Starter #1
Hello I have some cams for sale out of my VVT applications.

Comp 274 P/N: 201-428-17 $300 shipped
Comp 270 P/N: 201-426-17 $275 shipped
Manual 6.4 with Springs: $175 shipped
Manual VVT 5.7 with Springs: $75 shipped

The Comp 270/274 will require the PSI1515 or similar style springs and retainers, as well as a Cam Phaser limiter. I’m keeping these to use with the custom cam I’m getting for boost. Any questions feel free to reach out to me here or via DM.


IMG_2868.jpg



Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,059 Posts
Discussion Starter #2
IMG_1434.jpg

Here is the Cam Card for the 270. I bought this one new 2 years ago. It has about 8-10k miles oof solid use street and strip. The Comp 274 was purchased at the beginning of this year from a friend who went boosted. Unknown mileage but is in very good shape.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,059 Posts
Discussion Starter #3
52679762865__E4D341DF-5F6E-4B73-9DCE-FB94ED862751.jpg

Stock 5.7 cam pulled around 60k miles.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,059 Posts
Discussion Starter #4
IMG_1424.jpg

Comp 270 before I installed it.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,059 Posts
Discussion Starter #5
6.4 cam has been sold.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,059 Posts
Discussion Starter #6
TTT someone must want to do a Cam upgrade out there.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,059 Posts
Discussion Starter #8
It’s fairly labor intensive, if you do a search on my name, I did a write up of the Comp 270 install I did. You will need springs rated to .650 inch lift (Mopar sells these for reasonably priced) a Phaser limiter kit about $90 from one of the supporting vendors. Possibly push rods and non MDS lifters if your car is an auto.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,059 Posts
Discussion Starter #9
IMG_3120.jpg

I’m adding more parts for sale, Complete 2013 tail light assemblies. Rt/Lt/CEnt $250. Buyer pays for shipping and fees unless friends and family is used.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,059 Posts
Discussion Starter #10 (Edited)
IMG_3123.jpg

Chrome gas cap $15 + shipped packed and ready to ship


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,059 Posts
Discussion Starter #11
IMG_3124.jpg

08-14 rear side Marker Lights with Mopar Decal. $20 shipped


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,059 Posts
Discussion Starter #13
I’m getting ready to pull my front & rear R/T stock Spindles & knuckles and Brake setup. I’m swapping to SRT Spindles & knuckles with Brembo’s.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: moparnoother

·
Registered
Joined
·
1,059 Posts
Discussion Starter #14
IMG_3150.jpg

Up grabs are a pair of 2013 Challenger R/T 2 piston calipers and spindles. These should be an upgrade for any SXT owners out there or a good start for anyone dealing with a rolling chassis. Asking $350 shipped for everything.


Sent from my iPhone using Tapatalk
 
1 - 14 of 14 Posts
Top