Dodge Challenger Forum banner

1 - 2 of 2 Posts

·
Super Moderator
Joined
·
14,221 Posts
Discussion Starter #1
Today, I did a quick, inexpensive interior mod that really helps to dress up my SRT and give it a more custom look.

I purchased a red SRT ignition emblem decal from one of our Supporting Vendors, Steve White Motors, for $6.95. (Note: All Challengertalk members can get a 5% discount by using promo code CHA1 for an SRT, R/T or Hellcat decal- see attached link, below). I also purchased a stick of 3M adhesive promoter on E-Bay for $4.95.

Here are the three easy installation steps:

1. Wipe the ignition push start button with alcohol to remove grime and body oil.

2. Rub on adhesive promoter and let it dry for 30 seconds.

3. Apply the emblem decal.

Tips: Since the ignition button has a beveled edge, it is not necessary to pop off the chrome trim ring. I did, however, using a small screwdriver.

The ignition button is inserted on an angle. I found it best to apply the decal while the button is already inserted into the ignition switch, otherwise it is very easy to install it crooked.

https://www.stevewhiteparts.com/?ye...cal&p=catalog&mode=search&scat=&search_in=all
 

Attachments

·
Registered
Joined
·
468 Posts
I have a Go Baby Go one. They are cool.
 
1 - 2 of 2 Posts
Top