Dodge Challenger Forum banner
  • Hey everyone! Enter your ride HERE to be a part of October's Ride of the Month Challenge!
1 - 4 of 4 Posts

·
Registered
Challenger R/T
Joined
·
106 Posts
Discussion Starter · #1 ·
Last week I keep thinking my Challenger was moving in drive way. This past weekend I readjusted both sides. Went down to end of drive way it’s a good incline and it still rolled. So back to try it again and did notice the left driver side didn’t work as well to lock up. So today I pulled the rotor off the left and applied the parking brake nothing moved. The other side is locked. Took the assembly apart and no cable attached.

Any information or advice on replacing?
Is there a tensioner to back off?

Thanks,
 

·
Registered
Joined
·
2,463 Posts
Last week I keep thinking my Challenger was moving in drive way. This past weekend I readjusted both sides. Went down to end of drive way it’s a good incline and it still rolled. So back to try it again and did notice the left driver side didn’t work as well to lock up. So today I pulled the rotor off the left and applied the parking brake nothing moved. The other side is locked. Took the assembly apart and no cable attached.

Any information or advice on replacing?
Is there a tensioner to back off?

Thanks,
Hi, can we have some pictures of what you found? Specifically what is broken?
 

·
Registered
Challenger R/T
Joined
·
106 Posts
Discussion Starter · #3 ·
You can see that this part had a stress crack likely when made to one side.
Brake adjusting lever it attached to moved freely.

Auto part Fossil
Pipe insulation
 
1 - 4 of 4 Posts
Top