Dodge Challenger Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I have a 2015 Challenger SXT Plus, it has keyless entryand push to start. I was adding a remote start system to it and found my push to start button does not have the same connection as my harness has. MY cars PTS button has a 4 pin 4 wire connector, the harness has a 6 pin 4 wire connector. I searched through your parts catalog online and when I search for that part, it comes up with a PTS button that is in fact different than mine in the back and it does have the 6 pin 4 wire connector. I searched prior years and they are all the same, I could not locate a PTS that matches mine. I looked through many wiring diagrams and cant find one to match my PTS button.

Has anyone else ran into this?
 

·
Registered
Joined
·
153 Posts
It's only uses 4 of the six anyway, pin 1 and 2 are not used, 3 is ground 4 is ignition switch position signal 5 is security K line communication and 6 is power.

Sent from my SM-G920V using Tapatalk
 
1 - 2 of 2 Posts
Top