Dodge Challenger Forum banner

1 - 5 of 5 Posts

·
Premium Member
Joined
·
931 Posts
Discussion Starter #1
Anyone have any ideas? I have all data but its not clear on the removing of the pressure fitting on the fuel rail!
 

·
Premium Member
Joined
·
931 Posts
Discussion Starter #2
Any advice?
 

·
Premium Member
Joined
·
537 Posts
You need a fuel line quick disconnect tool.



Pull the plug up, slide the tool underneath and push the plug down onto the tool. Once the tool slides underneath pull the plug up along with the tool, the line will come right off.

Make sure you open the gas cap to let the fuel lines depressurize as you'll have gas everywhere when the line comes off.

Tom
 

·
Banned
Joined
·
1,508 Posts
It is a 3/8 fuel disconnect on the rail. As stated you will need the disconnect tool. You can also remove it at the fire wall bu that would be in a 5/16 size.. Hope this helps..
 

·
Premium Member
Joined
·
931 Posts
Discussion Starter #5
thanks everyone
 
1 - 5 of 5 Posts
Top